Administrator Guide
• Connect the Ethernet cable to the thin client.
• Click Dene a wireless connection. From the list, select a wireless network, and click Connect.
NOTE:
– The option to dene a wireless connection is not available on thin clients without a WLAN module.
– To exit the Attach the Ethernet cable screen, and load the ThinOS system desktop, click Exit.
After the connection is established, the thin client validates the IP address from DHCP. If the DHCP contains the le server or
the Wyse Device Manager or Wyse Management Suite congurations, then the ThinOS system desktop is loaded. If the DHCP
validation fails, or the network connection fails, then the Management Conguration screen is displayed. Follow steps 6–9.
5. Click Next to enter the Management Conguration setup.
6. On the Management Conguration screen, congure the following:
• File Server—Enter the le server details to apply congurations including INI les, rmware, packages, and so on, from a
le server.
• WMS—Enter the group registration key and the Wyse Management Suite server URL to register the thin client to the Wyse
Management Suite.
• WDM—Enter the IP addresses or host names.
• Disable SSL warning—Select this check box to disable the SSL (Secure Sockets Layer) connection warnings.
• Certicates Manager—Click Certicates Manager to import or request a certicate.
NOTE: To exit the Management Conguration screen, and load the ThinOS system desktop, click Exit.
7. Click Done to exit the First Boot Wizard or click Next to enter the Connection Broker Conguration setup.
8. On the Connection Broker Conguration screen, congure the following:
14