Administrator Guide

• Citrix—The broker allows you to connect to full desktops using XenDesktop or individual applications using XenApp from a
centralized host through Citrix Receiver Client.
– Server Address—Enter the host name or IP address of the broker connection.
– Enable theme: ThinOS Lite—Select this check box to boot the thin client in ThinOS Lite mode.
– StoreFront style—Select this check box to enable the Citrix StoreFront based layout of published applications and
desktops on the thin client.
• Microsoft—The broker allows you to connect to the virtual desktops using RemoteApp and Desktop connection. Enter the
host name or IP address of the broker connection.
• VMware—The broker allows you to connect to the remote desktops using VMware Horizon Client.
– Server Address—Enter the host name or IP address of the broker connection.
– Enable theme: VMware View—Select this check box to set the ThinOS desktop theme to VMware View mode.
• DELL—The broker allows you to connect to the virtual desktops or applications using Dell vWorkspace. Enter the host
name or IP address of the broker connection.
• Amazon WorkSpaces—The broker allows your PCoIP clients to connect to virtual desktops that run on AWS. Enter the
host name/IP address/FQDN of the broker connection.
NOTE: Amazon WorkSpaces option is applicable only to the PCoIP clients.
• Other—The broker allows you to connect to the virtual desktops or applications using other supported protocols. Enter the
host name or IP address of the broker connection.
• Certicates Manager—Click Certicates Manager to import or request a certicate.
• Disable SSL warning—Select this check box to disable the warnings for your SSL (Secure Sockets Layer) connection.
9. Click Done.
NOTE: To congure the Management Conguration setup again, click Back, and follow steps 6 and 7.
The device exists from the First Boot Wizard mode, and the ThinOS desktop is displayed.
15