Administrator Guide

The Network Setup dialog box is displayed.

2. Click the General tab, and use the following guidelines:

a. To set the default gateway, select the type of network interface from the available options.

1. Single Network support—Either wireless or wired network is connected.

• ENET — Click this option, if you want set up the Ethernet Wired Network Connection.

• WLAN — Click this option, if you want set up the Wireless Network Connection.

• If the user use wireless network after selecting ENET connection or wired network after selecting WLAN

connection, then the system log "WLAN: set default gateway xx.xx.xx.xx" for rst case and "ENET: set default

gateway xx.xx.xx.xx" for second case are printed to ensure that the UI setting reects the actual usage.

NOTE: The User Interface (UI) will not be changed automatically.

2. Dual Network support—Both wireless and wired networks are connected. The default gateway is determined by the

UI settings.

b. Use Static Name Servers—By default, this check box is not selected, and thin client fetches the server IP address from

DHCP. Select this check box to manually assign static IP addresses.

If name servers are changed using GUI, INI or link down/up, then the details are displayed in Event Logs.

In dynamic mode, the DNS/WINS can be merged from Ethernet and Wireless, if network is not working.

1. Enter the URL address of the DNS Domain in the DNS Domain box.

2. Enter the IP address of the DNS Server in the DNS Server box.

Use of DNS is optional. DNS allows you to specify remote systems by their host names rather than IP addresses. If a

specic IP address (instead of a name) is entered for a connection, it is used to make the connection. Enter the DNS

Domain and the network address of an available DNS Server. The function of the DNS Domain entry is to provide a

default sux to be used in name resolution. The values for these two boxes may be supplied by a DHCP server. If the

DHCP server supplies these values, they replace any locally congured values. If the DHCP server does not supply

these values, the locally congured values will be used.

NOTE: You can enter up to 16 DNS Server addresses, separated by a semicolon, comma, or space. The rst

address is for the primary DNS server and the rest are secondary DNS servers or backup DNS servers.

3. Enter the IP address of the WINS Server in the WINS Server box.