Administrator Guide

b. Check registry and make sure the same driver has been installed.

1. Check the drivers in registry of the server or desktop which you want to connect. The server or desktop must have

ps, pcl5, pcl4 drivers in the registry and the same driver must be installed on the server or desktop.

2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\UniversalPrintDrivers\. ThinOS does not support EMF and XPS.

NOTE: The supported drivers in the following table are one of the supported drivers for Citrix UPD used in

ThinOS. One of the recommended driver is provided here as an example.

The supported drivers are listed in the following table:

Table 5. Supported drivers

Printer class Printer driver

PS HP Color LaserJet 2800 Series PS

PCL5 HP LaserJet 2200 Series PCL 5

PCL4 HP LaserJet Series II

c. If the server or desktop which you want to connect does not have these drivers, follow the steps mentioned here:

1. For example, in XenApp A6.5+2008 R2, add PCL driver in Server. Go to Device and Printers → Select any printer

→ Click Printer server properties → Driver tab and then add HP LaserJet 2200 Series PCL 5 driver.