Release Notes
Multi-monitors support for dierent protocols
This section contains information about using multiple monitors on dierent protocols.
Support for multi-monitors in Citrix
ThinOS supports ICA desktop multiple monitors in XenDesktop/XenApp 7.6 and later.
Prerequisites:
• Increase the value of MaxVideoMemoryBytes REG_DWORD to support one or more 4K resolution monitors. For more information, see
Citrix documentation at support.citrix.com.
• Increase the display memory limit to support more color depth and higher resolution. For more information, see Citrix documentation at
citrix.com.
User scenario:
1 Connect multiple monitors to ThinOS device.
2 In the Display Setup dialog box, disable Mirror Mode, and congure the display layout.
3 Launch an ICA desktop with full screen.
Table 25. Display details
Platforms Best resolution Maximum number of system displays
Standard or RDS desktop—
Windows 10 /2012 R2/ 2016
HDX 3D Pro desktop—
Windows 10 with GRID K1/K2
GPU
Wyse 5070 Extended thin client 1920 x 1080 6 4
2560 x 1440 6 4
3840 x 2160 6 Not supported, due to GRID
K1/K2 vGPU prole limitation.
Wyse 5070 thin client—Pentium
processor
1920 x 1080 3 3
2560 x 1440 3 3
3840 x 2160 3 Not supported, due to GRID
K1/K2 vGPU prole limitation.
Wyse 5070 thin client—Celeron
processor
1920 x 1080 2 2
2560 x 1440 2 2
3840 x 2160 2 Not supported, due to GRID
K1/K2 vGPU prole limitation.
Limitations
• For standard or RDS desktop (Windows10/ 2012 R2 /2016) on Wyse 5070 Extended thin client, Dell recommends that you use up to
four 4K monitors and remaining monitors with 1920 x 1080 resolution are supported.
• For HDX 3D Pro desktop using vGPU or GPU Passthrough, the supported resolution and number of supported monitors are dependent
on the NVIDIA’s GRID support matrix.
NOTE
: For more information about the Citrix ocial multiple monitors support, see Citrix documentation at support.citrix.com.
34 ThinOS 8.5_107