Release Notes

Parameters Description
EnableKeyboardMouseSettings=yes can be replaced as:
Privilege=none lockdown=yes EnablePeripherals=keyboard,mouse.
FastDHCP—FastDHCP identies the gateway rst. If the gateway
is same as the network before disconnection and the previous
DHCP information is valid, the same information is used. The
default value is yes.
HideWlanScan—HideWlanScan is used to disable WiFi scan in
lockdown mode. The default value is no.
TCPTosDscp—TCPTosDscp is used to set TOS eld for all TCP
packets when it is not precongured by other INI settings.
UDPTosDscp—UDPTosDscp is used to set TOS eld for all UDP
packets when it is not precongured by other INI settings.
AutoSigno={no, yes, 2–60}*
[Shutdown={no, yes}]
[Reboot={no, yes}]
Default is no.
AutoSigno—Yes/no option to automatically sign out a user when
the last opened session is closed.
Shutdown—Default is no. Yes/no option to shut down the thin
client. If shutdown is set to yes, the ShutdownCounter value is used
to control the count-down before the system is turned o.
Reboot—Default is no. Yes/no option to reboot the thin client. If
Reboot is set to yes, the ShutdownCounter value is used to control
the count down before the system is rebooted.
AutoSignO—AutoSignO can congure a value from 2 to 60.
This value represents the number of seconds a particular session
must be active before calling AutoSignO parameter.
SessionCong=ALL
[unmapprinters={no, yes}]
[unmapserials={no, yes}]
[smartcards={no, yes}]
[mapdisks={no, yes}]
[disablesound={no, yes, 2}]
[unmapusb={no, yes}]
[DisksReadOnly={no, yes}]
[MouseQueueTimer={0–99}]
[WyseVDA={no, yes}]
[WyseVDA_PortRange=startPort, endPort]
[UnmapClipboard={no, yes}]
[DefaultColor={0,1,2}]
[VUSB_DISKS={yes, no}]
[VUSB_AUDIO={yes, no}]
SessionCong
—Species the default settings of the optional
connection parameters for all sessions.
unmapprinters—Default is no. Yes/no option to un-map printers.
unmapserials—Default is no. Yes/no option to un-map serials.
smartcards—Default is no. Yes/no option to use smartcards.
mapdisks—Default is no. Yes/no option to map disks.
disablesound—Default is no. Yes/no option to disable sound. If
value is set to 2, the sound at remote computer is disabled.
unmapusb—Default is no. Yes/no option to un-map USBs.
DisksReadOnly—Default is no. Yes/no option to mount mass
storage disks as read-only.
MouseQueueTimer—Species the default queue timer of a mouse
event in an ICA or RDP session (in 1/100 of a second). It can be
used to adjust the bandwidth of a network.
WyseVDA—Default is no. Yes/no option to enable Virtual Desktop
Accelerator for all ICA and RDP sessions.
WyseVDA_PortRange—Sets the ThinOS VDA client port range.
The port range must follow these rules:
ThinOS 8.5_012 and ThinOS Lite 2.5_012
81