Setup Guide
INACTIVE=minutes
[NoSessionTimer=minutes]
[LockTimer=seconds]
Default is 0. There is no Idle timeout. The range is 0 minutes to 480
minutes.If the value given is bigger than 480, 480 is set instead. If
the value given is smaller than 0, 0 is set instead.
When the system idle is time out in the congured minutes, the
system will automatically sign o, reboot or shutdown which are
based on the setting of AutoSigno.
NoSessionTimer— The parameter NoSessionTimer has the same
range as INACTIVE and it is valid only if INACTIVE value is not 0. If
there is a session use the value of Inactive, otherwise use the value
of NoSessionTimer, if NoSessionTimer is congured.
If AutoSigno=yes Shutdown=yes is congured, then this
statement can work before signon.
If AutoSigno=yes Reboot=yes is congured, this statement can
work before signon.
LockTimer—If the parameter LockTimer is set, the terminal is
locked and the system idle is timeout in the congured seconds;
System will automatically sign o, reboot or shutdown based on the
setting of AutoSigno.
LongApplicationName={no, yes}
Default is no.
Yes/no option to display all 38 characters in a desktop icon name. If
LongApplicationName=no, then icons will display up to 19
characters; any over 19 characters and the last three characters will
be “…”.
MaxVNCD={0, 1}
[VNCD_8bits={yes,no}]
[VNCD_Zlib={yes, no}]
Default is 0.
Option to enable VNC shadowing. Default value is 0 means VNC
shadowing is disabled. Set to 1 to enable shadowing.
NOTE:
Only one VNC client session is allowed and a password is
required.
See also VNCPrompt in Connection Settings: wnos.ini les,
{username} INI, and $MAC INI Files to enable a VNC shadowing
prompt to a user.
See also VncPassword in Connection Settings: wnos.ini les only to
specify a string of up to 8 characters as the password used for
shadowing.
VNCD_8bits — Default is yes. Yes/no option to force the VNC
server to send out images with 8-bits-per-pixel; if set to no, the
VNC server will send out images with the current system color
depth.
VNCD_Zlib — Default is no. Yes/no option to allow the VNC server
to send data with Zlib compression.
MMRCong={VIDEO}
[ashingHW={0, 1}]
This parameter species whether to show the “HW” label at the
top left corner of video or not when HDX is hardware decoded. The
default value is 0. Set ashingHW to 0, if you want to hide HW. Set
ashingHW to 1, if you want to show HW.
Multifarm={no, yes}
Default is no.
28 Parameters for wnos INI les only