Setup Guide

If the rst boot order is not HardDisk, the system restart will boot from the BIOS
setting.
BootpDisable={no, yes}
Default is no.
BootpDisable — Yes/no option to disable BOOTP requests. ThinOS supports both
DHCP and BOOTP to obtain the network congurations. In the rst two attempts,
only DHCP is requested. Then, both DHCP and BOOTP are requested.
For some environments, BOOTP requests will delay obtaining the IP from the DHCP
server. Set BootpDisable=yes will only perform a DHCP request. This setting is only
valid after the next reboot.
CmosPassword=<password>
[encrypt={no, yes}]
CmosPassword — Species the BIOS password on supported platforms; string up to
8 characters.
encrypt — Default is yes. If encrypt=yes, an encrypted string is used as a password
and the password is encoded by Dell Wyse encrypt tool.
CustomInfo={yes, no}
[Custom1=custom1_str]
[Custom2=custom2_str]
[Custom3=custom3_str]
[Location=location_str]
[Contact=contact_str]
Yes/no option to congure or store custom information. If CustomInfo=yes, the
custom information congured by the following options will be stored into NVRAM. If
CustomInfo=no, the custom information in NVRAM will be cleared.
For example:
CustomInfo=yes custom1=11 custom2=2 custom3=3 location=wyse
contact=peter
NOTE: Maximum length is 32 characters.
**DeskColor=”rrr ggg bbb”
Default is “16 100 36”; where DeskColor =“16 100 36” (green) is the default.
Species the desktop background color in RGB string format that must be enclosed in
quotes, where rrr, ggg, and bbb are decimal numbers in the rage of 0 to 255. When
using this parameter in a wnos.ini le, it will be saved to NVRAM if EnableLocal is set to
yes in the wnos.ini le.
NOTE:
The MirrorFileServer parameter also supports the DeskColor parameter.
**Desktop=bitmap le
[Layout={center, tile, stretch}]
[IconTextColor="rrr ggg bbb"]
Desktop — Species a bitmap le to be used as wallpaper for the local desktop. This
le could be a 4-bit, 8-bit, or 24-bit BMP le or a standard GIF le or a standard JPEG
le. The le must be located in the FTP server wnos\bitmap directory. Default is Wyse
wallpaper. To disable the parameter, leave value blank (Desktop=wysedefault).
Layout — Default is stretch. Species the arrangement on the desktop background of
the bitmap le specied by the Desktop parameter, if auto dial-up is set, Layout is
invalid.
For center, the image is placed in the center of the desktop without image size
change. For tile, the image is replicated across the desktop. For stretch, the image is
modied to ll the desktop.
NOTE:
The MirrorFileServer parameter also supports the DeskColor parameter.
IconTextColor — Species the icon text color in RGB string format that must be
enclosed in quotes, where rrr, ggg and bbb are decimal numbers in the range of 0 to
255.
Device=cmos CMOS management (extract and restore cmos settings).
46 Parameters for wnos INI, {username} INI, and $MAC INI les