Setup Guide

After no mouse and keyboard input in 1 minute, the system will pop up a counter down
window to shut down in 30 seconds. You can cancel it.
EnablePeripherals—If the optional EnablePeripherals is set with Privilege=none, the
specied peripherals tab will be enabled. The value of the option can be a list of any
valid value separated with "," or ";". For Camera, Touchscreen and Bluetooth, they can
be enabled only, if the devices are available.
For example, Privilege=none lockdown=yes
EnablePeripherals=mouse,audio,camera,bluetooth, then mouse and audio tab will be
enabled. If there are camera and/or bluetooth devices, the camera and/or bluetooth
tab will be enabled too. The optional EnableKeyboardMouseSettings=yes can be
replaced as: Privilege=none lockdown=yes EnablePeripherals=keyboard,mouse.
FastDHCP— FastDHCP identies the gateway rst. If the gateway is same as the
network before disconnection and the previous DHCP information is valid, the same
information is used. The default value is yes.
ResourceURL={yes, no}
[Type={Picture}]
[URL=_url_path_]
[User=_user_name]
[Password=_password_]
[Encrypt={yes, no}]
The resource les have their specied default path in le server, for example, the
pictures for Showing Picture screen saver are from the folder /wnos/picture in le
server (default), and the bitmap are from /wnos/bitmap.
ResourceURL—If this option is set to yes, the subsequent options are use to
congure one or more resource URL. The system fetches the resource les from the
new URL.
If this option is set to no, all the subsequent options are to be ignored.
Type—This option species the resource type. Currently, only Picture is supported,
which is for Showing Picture screen saver.
URL—This option species a new URL of the resources.
User and Password—These options specify the credentials of the new resource URL.
Encrypt—This option species whether or not the password is encrypted. For
example, ResourceUrl=yes type=picture url=ftp://10.151.120.15/pic1 user=pteng
password=xxxxxx encrypt=no
**ScreenSaver=value{0, 1, 3, 5, 10, 15, 30}
[LockTerminal={0, 1, 2, 3}]
[Type={0, 1, 2, 3, 4}]
[VideoLink=httplink]
[VideoSpan=no]
[Unit=hour]
[Image=imagele]
[PictureTimer={2-60}]
[PictureOrder=random]
[PictureCheck=always]
[PictureLayout={stretch, tile, center}]
[Sleep={0-180}]
Screensaver— Species to put the thin client in a screensaver state when the time
limit for inactivity is reached, that is delay before starting is reached.
Default value is 10. Value and delay before starting the screensaver:
0 — Disabled
1 — 1 Minute
3- 3 Minutes
5 — 5 Minutes
10 — 10 Minutes
15 — 15 Minutes
30 — 30 Minutes
The default screen saver value is 10 minutes and the maximization value is 30 minutes.
LockTerminal— This is an optional parameter and species to put the thin client in
LOCK state when the screen saver is activated. Default is 0.
0 — Disabled.
58 Parameters for wnos INI, {username} INI, and $MAC INI les