Setup Guide

domain name and the card user will authenticate to the broker
server using the NetBIOS domain.
PnliteServer=<List of {IP address, DNS names, or URLs} >
[ReconnectAtLogon={0, 1, 2}]
[ReconnectFromButton={0, 1, 2}]
[AutoConnectList={*/ appname1;appname2; appname3...}]
[Timeout=5…300]
[CAGRSAAuthMethod={LDAP, RSA}]
[CAGAuthMethod={LDAP, RSA, LDAP+RSA, RSA+LDAP}]
[RequestIconDataCount={0-65535}]
[DefaultSettings={XenApp, XenDesktop}]
[SmartcardPassthrough={yes, no}]
[StoreFront={no, yes}]
[HttpUserAgent={UserAgent}]
[CAGSendDomain= {yes, no}]
[SFIconSortMode={0, 1, 2, 3}]
PnliteServer
— Species the list of IP addresses or host names
with optional TCP port number or URLs of PNAgent/PNLite
servers. The list is empty by default.
Each entry with optional port is specied as Name-or-IP:port,
where port is optional; if not specied, port 80 is used as the
default.
If a port other than 80 is used, the port number must be specied
explicitly with the server location in the form IP:port or name:port.
Once specied, it is saved in the non-volatile memory.
The statement PNAgentServer and Web interface for Citrix
MetaFrame Server is equal to this statement.
NOTE:
PnliteServer and the DomainList parameters can be used in a
{username}.ini le, but generally are used only in a wnos.ini
le.
The PNAgent/PNLite server list and associated domain list
optionally can be entered in DHCP server options 181 and
182, respectively. If entered in both places, the entries from
the Connection Settings: wnos.ini les, {username} INI, and
$MAC INI Files will take precedence. However, the
{username}.ini le will override the wnos.ini le if the identical
parameters with dierent values exist in the {username}.ini
le.
NOTE:
When Multifarm=yes, use # to separate failover servers, and
use a comma (,) or a semicolon (;) to separate servers that
belong to dierent farms.
ReconnectAtLogon — Species the reconnection function at log
in.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
ReconnectFromButton — Species the reconnection function
from the reconnect command button.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
AutoConnectList — Species the PNA applications that will be
automatically started when using PNA to sign on. If
AutoConnectList=*, then all the PNA applications will be
automatically connected.
The autoconnectlist is the connection description of application or
host name which can use the wildcard * to match the string.
IMPORTANT
: Appname values are case sensitive.
78 Parameters for wnos INI, {username} INI, and $MAC INI les