Setup Guide

StoreFront — Default is no. Yes/no option to support Citrix
StoreFront Authentication. The value will be saved into NVRAM.
HttpUserAgent—The option will replace the default “CitrixReceiver
WTOS/1.0” during Netscaler login. If you are using “WTOS/1.0” as
Netscaler Session Policy, set this INI parameter to retain your
Netscaler policy conguration.
CAGSendDomain—This option sends domain as domain\user to
external network Netscaler to support Netscaler and DUO
passcode authentication. The default value is no.
SFIconSortMode sorts storefront dekstop icon. The default value
is 0.
0— sorts by the position value from server side.
1—sorts in alphabetic order.
2—sorts in alphabetic order with desktop rst.
3—sorts in alphabetic with application rst.
RTPTosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/AF11/
AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/AF43/EF}
Sets RTP/UDP audio channel in the TOS elds.
SaveSysinfo={usb, _proto_, _full_url_}
[ScardLog=0xF ]
[Username=_username_]
[Password=_password_]
[Size=_le_length_limit]
[Append={yes, no}]
Congure the target clients to save the event logs.
full_url—If set as a specied full url name, it is saved into the
specied url. Otherwise, it is saved as a le name, such as /wnos/
troubleshoot/{TERMNAME}_LOG_{DATE}_{TIME}.txt.
usb—If set to usb, it is saved into the last mounted USB disk.
proto—If set to a protocol, for example, ftp, http or https, it is
saved into the le server with this protocol.
Scardlog—The Smart card Log option is a bit mask to control the
following logs:
• 0x1 Context log
• 0x2 Handle log
• 0x4 Status log
• 0x8 Transfer log
Username and Password—The options specify the account of the
le server or url. If not set, the default account of le server is
used.
Size—This option species the le size limitation. When the le is
greater than the specied size, the le will be cleared.
Append—This option appends the event log to the same le name
instead of creating a new le. It is only valid for full url with ftp. The
protocol http or https is also supported from 8.4.1 release.
For example, savesysinfo=http://10.151.121.3/wnos/
yyy.txt username=administrator password=wyseatc
append=yes Size=4000
.
The event log le yyy.txt is appended in every boot-up. If the le
size is up to 4000 bytes, then the le is cleared and continues to
save the log.
80
Parameters for wnos INI, {username} INI, and $MAC INI les