Setup Guide

[TSGWEnable={yes, no}] For example:
SessionConfig=RDP MaxBmpCache=1024
DefaultColor=1 EnableNLA=yes ForceSpan=yes
EnableTSMM=no EnableRecord=yes EnableRFX=no
RDPScreenAlign4=no
The options Wallpaper, Dragging, Animation and Theme can set the
RDP experience. Default is yes.
TosIpPrecedence — Allows you to set IP Precedance in the TOS
elds.
TosDscp — Sets IP DSCP in the TOS elds.
AutoDetectNetwork —Default is yes. Yes/no option to enable an
RDP session to adapt its data transfer to band width of network.
TSGWEnable—Default is yes. Yes/no option to obtain/enable TS
gateway for the applications and desktops from Microsoft RDS
broker server. The default value is yes which means that the TS
Gateway setting is automatically obtained or enabled from the
Microsoft RDS broker server.
SessionCong=Blast
[EnableH264={yes,no}]
[EnableH264={yes,no}] —This parameter controls the Blast H264
feature on the supported platforms. The default value is yes. The
value yes enables H264 and the value no disables H264.
This works on Blast H.264 supported platforms only.
TcpMaxRetransmission={2~12}
Congures the retransmission of a TCP connection. The default
value of this option is 5.
TerminalName=name
[reboot={yes, no}]
[Capital={yes, no}]
User can set a string up to 15 characters as terminal name. It can
be congured as system variable like $MAC, $SN or $IP etc.
If reboot is set to yes and the terminal name is changed, the
terminal will reboot.If "TerminalName=$DNS" is set, the system will
do reverse DNS lookup to congure the terminal name. For
example, if the DNS server congures the terminal IP as reverse
dns name p12345.wysespt.com, the terminal name will be
congured as p12345. If you set Capital=yes, the terminal name is
capitalized.
**UniSession={no, yes} Yes/no option to launch the connection only once at a time.
VDIBroker=vdi_broker_url
[AutoConnectList={*|host1;host2;host3…}]
VDIBroker — Species the VDI broker server; supports both http
and https.
If the vdi_broker_url does not start with http or https, the default
protocol used is http. For an https connection, only one URL is
accepted.
NOTE:
If the VDIBroker parameter value is changed, the thin client
will reboot without notice to the user so it can reconnect to
the new server.
AutoConnectList — Species the VDI or VDM host which will be
automatically started when using VDI or VDM sign-on. If the value
is *, all of the VDI or VDM hosts will automatically be connected.
The autoconnectlist is the connection description which can use
the wildcard * to match the string.
88 Parameters for wnos INI, {username} INI, and $MAC INI les