Administrator Guide

Figure 106. System preference

2 Click the General tab, and use the following guidelines:

a Screen Saver — Allows you to select the type of screen saver you want. The default is to Turn O Screen.

Other available selections are Flying Bubbles, Moving Image ,Showing Pictures and Playing Video which are screen savers

with the monitor remaining on.

b Timer — Select a time after which the screen saver is to be activated; either disable, 1 minute, 3 minutes, 5 minutes, 10

minutes

(default), 15 minutes, or 30 minutes.

When the zero client is left idle for the specied idle time, the screen saver is initiated.

c Locale — Select a language to be activated for the user login-experience; either French, German, or default English.

NOTE

: Locale changes the language for the user login-experience screens only displayed during boot-up and

Only the following messages are applicable for French locales:

• Username/Password/Domain

• System Information

• Shut down the system, restart the system, reset the system setting to factory default

• OK, Cancel

• Initiating devices

• Looking up IP address from DHCP, Note: Pressing CTRL-ESC keys cancel out of network check

• Retry DHCP for an IP address

• Waiting for network link….Please verify that network cable is plugged into back of unit

• Check Cable, No Ethernet link

• Leave administrator mode

• Connecting...

• Sign o from account

Conguring

Zero Client Settings 119