Administrator Guide

b Printer Name —(Required) Enter name you want displayed in your list of printers.
c Printer Identication- Enter the type or model of the printer in the exact text of the Windows printer driver name—including
capitalizations and spaces.
This name must be either the device driver name for the printer under the Microsoft Windows system, or a key to map to the
device driver. If not specied, the name will be defaulted to the printer-supplied identication for standard direct-connected USB
printers or Generic / Text for non-USB connected printers upon connection to Windows hosts. The driver name mapping takes
place either through a printer-mapping le read by the system as part of the global prole (wnos.ini) or by MetaFrame servers
through the MetaFrame printer conguration le (\winnt\system32\wtsprnt.inf).
d \\Host\Printer—Enter the Host\Printer or use the browse folder icon next to the box to browse your Microsoft Networks and
make the printer selection you want from the network printers available (The DNS name or IP address of the Windows print
server on the network).
e Printer Class — (Optional) Select the printer class from the list.
f Enable the printer device— Must be selected to enable the printer. It enables the device so it displays on the remote host.
g Enable LPD service for the printer—Select this to make the zero client an LPD (Line Printer Daemon) network print server for
LPR printing requests from the network.
If the zero client is to be used as an LPD printer server, DHCP must not be used and a static IP address must be assigned to the
zero client.
3 Click OK.
Using the Printer Setup Options
To Congure the Printer Setup Options:
1 From the oating bar menu, click the System Setup , and then click Printer Setup.
The Printer Setup dialog box is displayed.
Figure 122. Printer setup—Options
2 Click the Options tab and use the following guidelines:
a Default Printer —Select the printer you want to be the default printer from your list of available printers.
b Enable .print Client and Port —If you want to enable .print Client, select Enable print Client and then enter the port.
Conguring
Zero Client Settings 139