Administrator Guide

Parameter Description
NOTE: There is an exception in the logic above when the
'override=yes' option is used in INI le. This will make #2 take
priority over #1. For example
CCMEnable=yes CCMServer=xxx:8080
GroupPrefix=wlab GroupKey=TC-TEST-ENG
MQTTServer=xxx:1883 AdvancedConfig=yes
Override=yes
If IgnoreMqtt=yes is specied, CCM agent will not connect to MQTT
server. The default value is no.
Community=community [Encrypt={yes, no}] Species the SNMP community name. A string up to 31 characters is
valid. After you specifythe community name, it is saved in the non-volatile
memory. If you set the encrypt=yes, an encrypted string is used as a
community name. You must use the Windows Password_Gen tool or built-
in tool to generate the encrypted string. The default value is set to no.
CustomInfo={yes, no}
[Custom1=<custom1_str>]
[Custom2=<custom2_str>]
[Custom3=<custom3_str>]
[Location=<location_str>]
[Contact=<contact_str>]
Yes no option to congure/store custom information. If CustomInfo=yes,
the custom information congured by the following options will be stored
into NVRAM. If CustomInfo=no, the custom information in NVRAM will be
cleared.
For example:
CustomInfo=yes custom1=11 custom2=2 custom3=3
location=contact=peter
DefaultUser={username, $SYS_VAR}
[Display={yes, no}]
[disable={yes/no}]
Species the default sign-on user.
Display—If the value is set to yes, the username eld in sign-on window
will be displayed. By default the value is set to no and the eld will be
obscured with asterisks (*).
disable— If the value is set to yes, the user name eld in sign-on window
is disabled.
Password=<sign-on password>
[disable={yes/no}]
[encrypt={no, yes}]
Password— Species the password as the sign-on password. There is no
minimum length. The maximum length is 64 characters.
In xen.ini this sets as the default password. The system will sign on
automatically and not wait for username, password, and domain entries.
Disable—If the value is set to yes, the password eld in sign-on window
is disabled. Default is no.
encrypt - The default value is no. The options are used to enable or
disable an encrypted string for a password in the INI le instead of clear
text. If the value is set to yes, the password in the INI is an encrypt string
instead of clear text.
Desktop=<bitmap le>
[Layout={center, tile, stretch}]
[IconTextColor="<rrr ggg bbb>"]
Desktop — Species a bitmap le to be used as wallpaper for the local
desktop. This le could be a 4-bit, 8-bit, or 24-bit BMP le or a standard
GIF le or a standard JPEG le. The le must be located in the FTP server
xen\bitmap directory. Default is Wyse wallpaper. To disable the
parameter, leave value blank (Desktop=).
When the parameter is set to Desktop=''', the wallpaper is disabled.
182 Creating and Using xen.ini Files