Administrator Guide

Parameter Description
[WDMPort={128-254}]
[PnliteServer={128-254}]
[DomainList={128 -254}]
[VDIBroker={128-254}]
[RapportSecurePort={128-254}]
[Discover={yes, no}]
[WDMSecurePort={128-254}]
[WDMFQDN={128-254}]
[CCMGroupKey={128-254}]
[CCMServer={128-254}]
[CCMMQTTServer={128-254}]
[CCMCAValidation={128-254}]
RapportSecurePort— Species the HTTPS port of WDM server. It is in
6.3 to support WDM4.7.
Discover—If Discover=yes, the device fetches Wyse DHCP options from
DHCP server, otherwise, it prevents the device from fetching those
information. Default value is yes. If the device receives FileServer/
WDMServer information through the DHCP server, then the associate
User interface is protected.
NOTE:
WDMSecurePort is the specied HTTPS port of the WDM
server.
WDMSecurePort—Species the HTTPS port of WDM server.
WDMFQDN — Species the Fully Qualied Domain Name (FQDN) of
the WDM server.
NOTE: The CCMGroupKey, CCMServer and CCMMQTTServer
options are specied to remap the tags for CCM conguration.
NOTE:
• WDMServer (186) species ip address of WDM server.
• WDMServer (192) species HTTP port of WDM server.
• WDMSecurePort (190) species HTTPS port of WDM server.
• WDMFQDN (194) species the FQDN of WDM server.
• CCMGroupKey (199), CCMServer (165), CCMMQTTServer
(166) and CCMCAValidation (167) specify to remap the tags for
CCM conguration.
Device=Ethernet
[Speed={Auto, 10M HD, 10M FD, 100M HD, 100M FD, or
1000M}
[MTU=mtu]
[KeepAlive={5-600}]
[Warning={no, yes}]
[StaticIPWaitFileServer={0-255}]
[WirelessWaitEnet={1-60}]
Device — Species to use an ethernet.
Speed — Default is auto. Species the ethernet speed to either Auto,
10M HD, 10M FD, 100M HD, 100M FD, or 1000M. If Speed is set in a
xen.ini le, the Speed statement in the {username}.ini le will be disabled.
NOTE:
Device and Speed parameters can be replaced by the
EthernetSpeed parameter.
MTU — A maximum transmission unit value between 500 to 1500.
KeepAlive — Species a time value in seconds between 5 and 600, to
keep an idle connection alive.
Warning — Default is no. Yes/no option to warn about an idle
connection.
In the seconds of the specied KeepAlive, if the tcp connection is idle and
Warning=yes, one log will be printed for the session. For example:
device=ethernet keepalive=20 warning=yes
StaticIPWaitFileServer — Default is 0. Species the timeout threshold
in seconds for cases of static IP. Note that the default 0 turns o this
parameter and will allow the system to wait the system default 120
seconds.
CAUTION
: If the Speed parameter value is changed, the client
will require a reboot.
188 Creating and Using xen.ini Files