Administrator Guide

Parameter Description
NOTE:
Event log will display new statements stating that FileSystem
encryption has been enabled.
PnliteServer=<List of {IP address, DNS names, or URLs} >
[ReconnectAtLogon={0, 1, 2}]
[ReconnectFromButton={0, 1, 2}]
[AutoConnectList={*/ appname1;appname2; appname3...}]
[Timeout=5…300]
[CAGRSAAuthMethod={LDAP, RSA}]
[CAGAuthMethod={LDAP, RSA, LDAP+RSA, RSA+LDAP}]
[RequestIconDataCount={0-65535}]
[DefaultSettings={XenApp, XenDesktop}]
[SmartcardPassthrough={yes, no}]
[StoreFront={no, yes}]
[HttpUserAgent={UserAgent}]
[CAGSendDomain= {yes, no}]
[IgnoreDefaultGateway={yes, no}]
[CAGUserAsUPN={yes, no}]
[CAGExternal={yes, no}]
[DisableSFInit={yes, no}]
PnliteServer
—Species the list of IP addresses or host names with
optional TCP port number or URLs of PNAgent/PNLite servers. The list is
empty by default.
Each entry with optional port is specied as Name-or-IP:port, where port
is optional; if not specied, port 80 is used as the default.
If a port other than 80 is used, the port number must be specied
explicitly with the server location in the form IP:port or name:port. Once
specied, it is saved in the non-volatile memory.
The statement PNAgentServer and Web interface for Citrix MetaFrame
Server is equal to this statement.
NOTE:
PnliteServer and the DomainList parameters can be used in a
{username}.ini le, but generally are used only in a xen.ini le.
The PNAgent/PNLite server list and associated domain list
optionally can be entered in DHCP server options 181 and 182,
respectively. If entered in both places, the entries from the
Connection Settings: xen.ini les, {username} INI, and $MAC INI
Files section will take precedence. However, the {username}.ini le
will override the xen.ini le if the identical parameters with dierent
values exist in the {username}.ini le.
NOTE:
When Multifarm=yes, use # to separate failover servers, and use a
comma (,) or a semicolon (;) to separate servers that belong to
dierent farms.
ReconnectAtLogon — Species the reconnection function at log in.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
ReconnectFromButton — Species the reconnection function from the
reconnect command button.
Default is 0 — disables the option.
1 — reconnects to disconnected sessions only.
2 — reconnects to active and disconnected sessions.
AutoConnectList — Species the PNA applications that will be
automatically started when using PNA to sign on. If AutoConnectList=*,
then all the PNA applications will be automatically connected.
The autoconnectlist is the connection description of application or host
name which can use the wildcard * to match the string.
IMPORTANT
: Appname values are case sensitive.
Creating and Using xen.ini Files 205