Administrator Guide
3 Click the Audio Device tab to congure the RTME audio settings, such as speakers, microphone, and ringer settings.
NOTE: The RTME audio device on ThinOS Lite shows only one device from ThinOS Lite local playback device. It can
actually work the way they are congured at ThinOS Lite local playback device and record device. The RTME audio
device for ringtone is limited to use ThinOS Lite local playback device. This is a known Issue.
4 Click the Video Device tab to congure the RTME video settings. From the drop-down list, select the webcam that you want to use
for video calls.
5 Click the Call Forwarding tab to congure the call forwarding settings.
You can congure the following options:
• Turn o call forwarding
• Forward any call to a specic number
• Simultaneously ring
NOTE: The latest call forwarding settings congured by you are displayed in the lower pane of the dialog box.
Known Issues with RTME 1.8 feature
• RTME operation system on ThinOS Lite is displayed as Linux.
• The RTME 1.8 feature on ThinOS Lite does not work with other versions of HDX RealTime connector due to known Citrix limitation.
• If you change the audio device during an RTME call, the audio input or output might stop responding.
• Using similar hardwares, such as Dx0D, ThinOS Lite, Linux, and Windows (D90D7) produce similar video frame rate (20-30) and video
resolution (320-400). It produces better video quality using laptop or PC because of better CPU capability.
• In a video conference call, when dierent user is speaking, the on-screen video switches to the active user, but takes a few seconds to
switch over.
Tested devices—For information about the tested devices for RTME, see the latest Dell Wyse ThinOS Lite release Notes.
Verifying the RTME 2.x status
This section describes the working of RTME 2.x and how to verify the RTME status.
Salient Features
• Native SFB client menus and operations are available.
• Better initialization eliminates DNS confusions.
• Supports more call features, such as call delegation, and response group.
• Supports video codec H.264-UC, and audio codec SILK introduced by RTME 2.1.
• Call Admission Control support
• Bandwidth Policy Control
• DSCP/ QoS Conguration
• Ability to turn o version mismatch warnings for acceptable combinations of RealTime Connector and RealTime Media Engine.
To verify the RTME status, do the following:
1 Install the correct connector on the remote desktop.
2 Install the correct package on the ThinOS Lite device.
3 Plug-in the audio/video devices.
NOTE
: USB redirection must be disabled for audio or video devices.
4 Connect to the remote desktop using SFB client 2015.
5 Verify the RTME connector 2.2 icon on taskbar. The status is displayed as Connected.
6 Verify the About, and Settings options from the RTME connector 2.2 menu.
Conguring
the connection broker 77