Release Notes

Reference Description
DisableShowDisclaimer—The option is set to yes to disable
popup/pre-logon message and automatically accept them
without intervention when broker type is VMware View. The
default value is no.
DisableShowServer—The option is set to yes to disable showing
the view server URL in sign-on window and disclaimer window
when broker type is VMware View. The default value is no.
DHCPOptionsRemap={yes, no}
[WDMServer={128-254}]
[WDMSecurePort={128-254}]
[WDMFQDN={128-254}]
[CCMGroupKey={128-254}]
[CCMServer={128-254}]
[CCMMQTTServer={128-254}]
[CCMCAValidation[]={128-254}]
If DHCPOptionsRemap=yes, the following parameters can be set.
The options value must be between 128 and 254. Each value must
be dierent. These options are used to congure DHCP server tags
for WTOS booting.
WDMServer (186) species ip address of WDM server.
WDMServer (192) species HTTP port of WDM server.
WDMSecurePort (190) species HTTPS port of WDM server.
WDMFQDN (194) species the FQDN of WDM server.
CCMGroupKey (199), CCMServer (165), CCMMQTTServer (166)
and CCMCAValidation (167) specify to remap the tags for CCM
conguration.
DNSIPVersion={ipv4, ipv6}
[Combined={yes, no}]
Specify the DNS server and domain. Default IP version is ipv4.
Combined—If option is set to yes, the DNS server will combine
the DNS server congured by DHCP and the static one, the
DNS domain will use the value congured by DHCP in case of
static DNS domain is empty.
Dualhead={yes, no}
[EnsureDpIsOn ={yes, no}]
For V-class, C-class, R-class, D-class and X10J/T-class, set to yes
to support dual-monitor.
EnsureDpIsOn—The optional keyword is only used for D-class.
When EnsureDpIsOn is set to yes, D-class will halt at boot time
until DP monitor is plugged in.
CaradigmServer=vip list
[DisableManualLogon=yes, no]
A list of VIP addresses with optional TCP port number of Caradigm
servers.
DisableManualLogon—The option is set to yes to disable user to
manually enter credentials to authenticate into the device. It
only allows an already enrolled proximity badge and in active
grace period to authenticate with a single badge tap. The default
value is no.
INACTIVE=minutes
[LockTimer=seconds]
LockTimer—If the option is set, then the terminal is locked and
the system idle is timeout in the congured seconds; System will
automatically sign o, reboot or shutdown based on the setting
of AutoSigno.
OneSignServer=onesign_server [AutoAccess={VMW, XD, XA,
LOCAL, RDSHD, RDSHA, RDSHPC}]
A list of host names or IP addresses with optional TCP port number
or URLs of Imprivata OneSign servers. It should use https protocol.
If OneSignServer="" is dened, then only Imprivata virtual channel
can work.
From ThinOS version 8.3_109, ThinOS supports OneSign 5.2
RDSH broker. Set AutoAccess=RDSHD or RDSHA to auto
Dell Wyse ThinOS Version 8.4
Release Notes
23