Administrator Guide

Requesting certificate manually
To request the certificate manually, do the following:
1. Go to System Tools > Certificates > Request Certificate.
The Request Certificate dialog box is displayed.
2. Enter the appropriate values in the Request Certificate dialog box, and then click the Request Certificate button.
The certificate request is sent to the server, and the client receives the response from server and installs both CA certificate
and client certificate.
3. Click Ok to save the changes.
NOTE:
● The CA Certificate Hash type currently supports MD5, SHA1, and SHA256.
● The request server URL can be an HTTP or HTTPs link. You can add the protocol prefix before the URL.
Requesting certificate automatically
Use INI parameters to automate the request, and renew the certificate process. Related INI parameters are of global scope and
should be used with INI parameter ScepAutoEnroll.
For more information about using the INI parameters, refer to the latest Dell Wyse ThinOS INI Reference guide.
192
Performing diagnostics