Setup Guide

Table 4. General Settings: wnos.ini files only (continued)
Parameter Description
network, audio, printer, language, all. The default value is
None.
NOTE:
If the parameter ManualOverride is set, a warning
message is displayed when the users try to reset the
device to allow them to retain the personalized settings
or revert to default settings. The components set using
the INI statements are ignored.
For example,
ManualOverride=Yes
Components="display,timezone"
This INI statement allows you to customize display and
timezone settings, and these personalized settings are not
overridden by wnos.ini after the device restart.
MirrorFileServer={no, yes}
Default is no.
Yes/no option to enable the cache all server files functionality.
This enables the cache all server files such as INI files,
wallpaper, bitmap, font, local messages and so on to the
local flash when files are changed in the file server. ThinOS
would use the cached files when files on the file server are
unavailable.
NOTE: S10 is not supported
RootPath=<file server root path>
This file server root path is entered into thin client local
setup (non-volatile memory). The thin client immediately uses
this path to access files. The directory name \wnos will be
appended to the file server root path entry before use.
TerminalName=<name>
[reboot={no, yes}]
TerminalName — Name of the client comprising a 15-
character string. It can also be configured with system
variables. Basically all the variables can be used except $TN
(recursive), $UN, $PW, $DN. However, these are not yet
available when parsing wnos.ini. Additionally combinations like
xy$mac, sz$tnxyz etc are supported.
reboot — Default is no. Yes/no option to reboot the thin
client if the terminal name is changed.
TimeZone=<zone value>
[ManualOverride={no, yes}]
[daylight={
no, yes}]
[start=MMWWDD end=MMWWDD]
[TimeZoneName=<timezonename>]
[DayLightName=<daylightname>]
TimeZone — Specifies the time zone if the zone is
unspecified on the thin client or is used with ManualOverride.
Supported zone values s are listed in the System Preference
dialog box on the thin client and in TimeZone Parameter:
Values.
NOTE:
The TimeZone parameter is dependent on the
TimeServer=parameter. If a time server is not defined,
the client CMOS/BIOS internal clock will be used as a
reference.
ManualOverride — Default is no. Yes/no option to override
the thin client System Preference Menu setting with this
TimeZone setting. TimeZone settings in the wnos.ini file will
be saved into NVRAM if EnableLocal=yes is set in the wnos.ini
file.
Parameters for wnos INI files only 17