Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
Toolbardisable — Default is no. Yes/no option to disable the Zero toolbar
from displaying; if set to yes, this option overrules other toolbar display
options.
Toolbardisablemouse — Default is no. Yes/no option to disable the Zero
toolbar from automatically displaying once you pause the mouse pointer on
the left side of the screen for a specified amount of time.
toolbarclick — Default is no. Yes/no option to pop up the toolbar only if
clicking on the left-most side of the screen.
toolbardelay — Specifies the seconds to delay before displaying the toolbar
after pausing the mouse pointer on the left-most side of the screen. The
value 0 will have no delay. The other values 1, 2, 3,4 will delay 0.5, 1, 1.5 and 2
seconds respectively.
toolbar_no_conmgr — Default is no. Yes/no option to hide the Home
button.
toolbar_no_minimizeall — Default is no. Yes/no option to hide the Home
button thus affecting the ability to minimize displayed list of connections.
toolbardisablehotkey — Default is no. Yes/no option to disable the
CTR+ALT+UP ARROW keyboard shortcut that allows the toolbar to instantly
display without a timer.
ToolbarEnableOneSession — Default is no. Yes/no option to enable the
toolbar when only one session is available.
ToolbarAutoQuit — Default is yes. ToolbarAutoQuit=no prevents the sub-
window from being closed. The toolbar will auto-hide after a certain amount
of time after user pause the mouse pointer away from the toolbar.
ToolbarStay — ToolbarStay={1~20} controls the auto-hide duration, 0.5s
per value. Thus if ToolbarStay=1, the Toolbar will auto-hide after 0.5 second;
If ToolbarStay=10, the Toolbar will auto-hide after 5 seconds.
EnableLogonMainMenu — Default is no. Yes/no option to enable the main
menu if you click the mouse button on the desktop prior to logon in Zero
mode.
[HorizonIsClassic=[yes, no]]—When the value is set to
HorizonIsClassic=yes, this parameter enables the VMware mode to be
displayed in the classic mode.
SysName
NOTE: DISCONTINUED. DO NOT USE.
TcpTimeOut={1 , 2}
Default is 1.
Specifies the timeout value of a TCP connection. The number of 30 seconds
for the timeout value of a TCP connection. The value must be 1 or 2 which
means the connection timeout value is from 1x30= 30 seconds to 2x30= 60
seconds.
Values of 3-255 are recognized only for backwards compatibility that is >2 =
60 seconds, however, these values should not be used and the value should
be set to 2.
VncPassword=<password>
[encrypt={no, yes}]
VncPassword — Specifies a string of up to 8 characters as the password
used for shadowing.
encrypt — Default is no. Yes/no option to set according to whether or not
the vncpassword you are using is encrypted.
NOTE: To use VNC Shadow, you must set MaxVNCD=1 and define a
password; The MaxVNCD default is 0 and this disables VNC. If you are
Parameters for wnos INI files only 39