Administrator Guide

[Option2={1, 2, 3, 4}]
Since you are using Connect=ICA, then Option 1 and its default value 0 will automatically be used as Option 1 has an
underlined value (default of 0). You can still use Option 2 if you want to, however, Option 2 is not automatically used with
the parameter as Option 2 does not have a default value.
NOTE:
Any option in ICA Connect Options that is used in a {username}.ini file will return to the default value set for that option in
the wnos.ini file after a user sign-off. For example, if your {username}.ini file contains the option Reconnect=yes so that a
lost connection will restart 20 seconds after disconnection; and you sign off the thin client, then the Reconnect value will
return to the original default value of no (Reconnect=no) contained in the wnos.ini file—so that others who sign in can use
their own user profile; assuming the administrator has not changed the default values in the wnos.ini.
ICA connect: options
Table 23. ICA connect: options (continued)
Option Description
Alternate=[no, yes] Default is no.
Yes/no option to use an alternate IP address returned from an
ICA master browser to get through firewalls.
AudioQualityMode={0, 1, 2, 3} Default is 0.
Specifies the audio quality of a session.
0 – Default
1 – High Quality
2 – Medium Quality
3 – Low Quality
Autoconnect={0 to 99}
Default is 0.
Use for automatically starting a session after you sign in, if
sign-on is enabled.
The value of 0 – 99 is the delay in seconds before auto-
starting the session.
AppendUsername=1
This enhancement allows user names to display in the title bar
of an ICA session at the client side.
Browserip=list of browsers
List of IP addresses or DNS registered names to specify ICA
browsers. List items must be separated by semicolons or
commas.
Colors={256, 32k, 64k or high, 16m, true} Default is high.
Session color mode. For faster display performance, use 256
colors for the session.
● 256 is 8-bits
● 32k is 15-bits
● 64k or high is 16-bits
● 16m is 24-bits
● true is 32-bits
NOTE:
● 64k is the same value as high.
218 Creating and Using xen.ini Files