Administrator Guide

e. System Preference — Allows user selection of zero client parameters that are matter of personal preference.
f. Display — Allows you to configure the monitor resolution and refresh rate.
g. Peripherals — Allows you to select the peripherals settings such as keyboard, mouse, volume and touch screen
settings.
h. Printer — Allows configuration of network printers and local printers that are connected to the zero client.
i. System Tools — Opens a submenu from which the xen.ini and user.ini windows can be opened to view the contents of
the files.
j. Trouble shooting Options — Displays Performance Monitor graphs that display client CPU, Memory and Networking
information and trace route response messages.
Accessing system information
Use the System Information dialog box to view system information:
● Zero Desktop — Click the System Information icon on the Zero toolbar.
The System Information dialog box includes:
● General tab — Displays general information such as System Version, Serial Number, Memory Size (Total and Free), CPU
Speed, ROM Size, Monitor, Parallel ports, Terminal Name, Boot from, Memory speed, SSD size, Resolution and Serial ports.
● Copyright/Patents tab — Displays the software copyright and patent notices.
● Acknowledgements button is added under Copyrights tab in System Information. This button is related to third party
software and is available only in following clients:
○ Wyse 5010 Zero Client for Citrix — D00DX (ThinOS Lite Pro 2)
● Event Log tab — Displays the zero client start-up steps normally beginning from System Version to Checking Firmware or
error Messages that are helpful for debugging problems. The details about the monitors connected to the zero client are also
displayed.
When you install the packages or restart the client, the zero client verifies the version of the installed packages. If you
have not installed the latest package version, the details about the current package version and the recommended package
version are displayed.
● Status tab — Displays status information about TCP performance related parameters, UDP performance related
parameters, CPU Busy, System Up Time, CCM status, Free Memory, Active sessions, and WDM status.
● IPv6 tab — Displays IPv6 information such as Link-local Address, IPv6 Address and IPv6 Default Gateway.
● ENET tab — Displays information about wired network information.
● WLAN tab — Displays information about wireless network information.
● About tab—Displays information about ThinOS Lite operating system. The following attributes are listed:
○ Platform name
○ Operating system type
○ Build name
○ Build version
○
BIOS name
○ BIOS version
○ Citrix Broker or Receiver version—This represents ICA revisions between the ThinOS Lite versions.
○ Dell vWorkspace version
○ Imprivata version
○ Caradigm version
○ SECUREMATRIX version
○ HealthCast version
NOTE:
This tab is displayed when IPv6 is enabled in the General tab of the Network Setup dialog box, see Configuring
the Network Settings.
● Kernel mode—The components are implemented in Kernel according to the specification. The version is displayed as
[max].[min], which is the base version of protocol or server or client of the component. For example, the Imprivata
version is 5.2, and so on.
24 Getting started