Administrator Guide

Figure 12. Broker setup
2. Select the StoreFront Style check box to enable the StoreFront style.
3. Broker Server— Enter the IP address / Hostname / FQDN of the broker server.
4. Select the Enable automatic reconnection at logon check box to enable automatic re-connection at logon.
NOTE:
If you enable the automatic re-connection, you are able to select from the re-connection options. Click either of
the options where you can connect to disconnected sessions only or both active and disconnected sessions.
5. Select the Enable automatic reconnection from the button menu check box to enable automatic reconnection from the
button menu. You can select any of the following options:
● Connect to disconnected sessions only.
● Connect to active and disconnected sessions.
6. Account Self-Service Server— Enter the IP address of the Account Self-service Server.
7. XenApp — Use this option if you want to set default settings to XenApp.
8. XenDesktop— Use this option if you want to set default settings as XenDesktop.
9. Click OK to save the settings.
Configuring the visual settings
To configure the visual settings:
1. From the floating bar menu, click the System Setup , and then click Remote Connections.
The Remote Connections dialog box is displayed.
2. Click Visual Experience tab and use the following guidelines:
NOTE:
The Visual Experience tab is grayed out, if the StoreFront Style check box is selected for a Citrix Broker
Server entered in the Broker Setup tab.
a. Select the check box to enable Zero Toolbar activation in left pane.
38
Configuring the connectivity