Administrator Guide

For Swap dual screens, when you set Main Screen to Screen2, an additional check box is displayed at the bottom of the
tab that allows you to swap dual screens. If you clear the check box, the Screen1 is usually the left one or the top one in
dual display. When you set Main Screen to Screen2, the main screen is changed to the right screen or bottom screen. If
you select the swap dual screens check box, you are able to set Main Screen to Screen2, but still have it at the left side
or the top side, which is considered more user friendly.
Changing Display Settings Dynamically
From ThinOS 8.4 release, after you change the display settings, the changes will take effect immediately without a system
restart.
Single mode user scenario
Go to System Setup > Display > General, and do the following:
1. Change resolution from DDC table or User defined display settings.
2. Change rotation setting from User defined display settings.
When the display settings are changed, the modified settings are applied to the active sessions dynamically. But some of the
active sessions disconnect and then reconnect. For example, RDP for Win7 session.
Dual Head user scenario
Go to System Setup > Display > Dual Head and change the settings.
116
Configuring thin client settings