Administrator Guide
Figure 33. Broker setup - Teradici Cloud Access
2. On the Broker Setup tab, from the Select Broker Type drop-down list, select Teradici Cloud Access, and configure the
following options:
● Broker Server—Enter the IP address or FQDN of the broker server.
● Auto Connect List—Enter the name of desktops that you want to start automatically after logging in to the respective
broker. Use a semicolon to separate each desktop name.
NOTE: Field values are case-sensitive.
● Security mode—Select your preferred security mode from the following options:
○ Warning—Warn Security requires an FQDN address with a self-signed certificate, or without any certificate.
However, a corresponding warning message is displayed for the user to continue.
○ Full—Full Security requires an FQDN address with a domain certificate.
○ Low—Security allows an FQDN or an IP address with or without a certificate.
○ Default—Follows global security mode settings.
● Connection Protocol—By default, the option is set to PCoIP Only.
3. Click OK to save your settings.
154
Configuring the connection brokers