Administrator Guide

Configuring the peripherals settings
The Peripherals dialog box enables you to configure the settings for the Keyboard, Mouse, Audio, Serial, Camera, Touch
Screen, and Bluetooth.
Configuring the keyboard settings
To configure the keyboard settings:
1. From the desktop menu, click System Setup, and then click Peripherals.
The Peripherals dialog box is displayed.
2. Click the Keyboard tab and set the Character Set, Keyboard Layout, Delay Before Repeat and Repeat Rate parameters. The
following table explains the keyboard parameters.
Table 38. Keyboard settings
Parameter Description
Character Set Specifies the character set. Each character is represented
by a number. The ASCII character set, for example, uses the
numbers 0 through 127 to represent all English characters
and special control characters. European ISO character sets
are similar to ASCII, but they contain additional characters
for European languages.
Keyboard Layout Presently the keyboard languages listed in the Keyboard
layout drop-down list are supported. The default value is
English (United States).
Delay Before Repeat Specifies the repeat parameters for held-down key. Select
the Delay before repeat value as either 1/5 second, 1/4
second, 1/3 second, 1/2 second, 3/4 second, 1 second,
2 seconds, or No Repeat. The default is 1/3 second.
Repeat Rate Select Slow, Normal, or Fast. The default value is Medium.
3. Click OK to save the settings.
170
Configuring local settings