Deployment Guide

Table 13. ICA connect: options (continued)
Option Description
Yes/no option to not auto-connect to local printers when the
connection starts.
UnmapSerials={no, yes}
Default is no.
Yes/no option to not auto-connect to local serials when the
connection starts.
UnmapUSB={no, yes}
Default is no.
Yes/no option to not auto-connect to local USB devices
(Virtual USB) when the connection starts.
Username=[username, $SYS_VAR]
Username to log-in to the application server. Either a
conventional login username or a variable can be used.
Maximum of 31 characters are allowed.
The value of username is a conventional login username.
The value of $SYS_VAR is a system variable found in System
variables.
NOTE:
The combination of all the variables such as $IP@$DN are
also supported.
Username-enc=an encrypted username Specifies an encrypted string as a username for a connection.
[WyseVDA={no, yes}]
Default is no.
Yes/no option to enable Wyse Virtual Desktop Accelerator for
all ICA sessions.
RDP connect options
Table shown here contains the supported options used for RDP connections after you use the Connect=RDP parameter/
selection.
NOTE:
If an option has an underlined value (default), that option and default value will automatically be used with Connect=RDP;
options without underlined values can also be used if you want to, but are not automatically used with Connect=RDP. In
addition, when using options, you can leave the default value or change it to another value shown.
For example, in the following case where:
Connect=RDP
[Option1={0, 1}]
[Option2={1, 2, 3, 4}]
Since you are using Connect=RDP, then Option 1 and its default value 0 will automatically be used as Option1 has an underlined
value (default of 0). You can still use Option 2 if you want to, however, Option 2 is not automatically used with the parameter as
Option 2 does not have a default (underlined) value.
NOTE:
Any option in RDP Connect Options that is used in a {username}.ini file will return to the default value set for that option in
the wnos.ini file after a user sign-off.
For example, if your {username}.ini file contains the option Reconnect=yes (so that a lost connection will restart 20 seconds
after disconnection) and you sign off of the thin client, then the Reconnect value will return to the original default value of
100 Connect Parameter: Options