Deployment Guide

Table 4. General Settings: wnos.ini files only (continued)
Parameter Description
or
Device=cmos AutoPower=(yes, no)
Yes/no option on how the system starts when the power is
first applied to the thin client.
If set to yes, then the system starts itself without waiting
for users to press the power button. In cases where power
was lost unexpectedly and if the thin client was shut down
properly before power was lost unexpectedly, when the power
is restored, the thin client will be powered. This setting is
useful in a kiosk environment.
Once an AutoPower statement is processed, it alters the
behavior of the thin client until a countermanding statement
is processed. The effect of an AutoPower=yes statement
continues even if the statement is removed from the INI file in
which it was found.
Use of the AutoPower option does not interfere with
performing a user directed shutdown.
CCMEnable={yes, no}
[CCMServer=server_address[:port]
[GroupPrefix=<prefix>]
[GroupKey=<hashkey>]
[MQTTServer=<mqtt_address>[:<mqtt_port>]]
[AdvancedConfig={
no, yes}]
[CCMDefault={
no, yes}]
[Override={no, yes}]
[CAValidation=(yes, no)]
[Discover=(yes, no)]
[IgnoreMqtt=(yes, no)]
From ThinOS 8.4.1 release, these INI parameters are applicable
to Wyse 3040 thin client.
CCMEnable — Yes/no option to enable the Cloud Client
Manager Agent. Default is no
CCMServer — Specifies a IP address or URL address for
the CCM server. Default protocol is HTTPS if "http://"
or "https://" is not available. Default port is 443. Once
specified, it is saved in the non-volatile memory. Example:
CCMEnable=yes CCMServer=http://xxx:8080
GroupPrefix and GroupKey — The options GroupPrefix and
GroupKey compose the Group Registration Key of the Cloud
Client Manager server. Once specified, it is saved in the non-
volatile memory.
NOTE:
The numbers before the dash on the Group Registration
key is the GroupPrefix value and the characters to the
right of the Group Registration Key is the GroupKey value.
NOTE: The length of GroupPrefix is fixed to four; the
length range of GroupKey is from eight to 31 characters.
MQTTServer — Specifies a IP address or URL address for
the MQTT server and MQTT port after the : (colon). Once
specified, it is saved in the non-volatile memory.
AdvancedConfig — Default is no. Yes/no option to enable
the Cloud Client Manager server and MQTT server fields in
the GUI. If AdvancedConfig=yes is specified, the Cloud Client
Manager server and MQTT server fields in the Cloud Client
Manager UI will be enabled. See also PRIVILEGE parameters in
General Settings for wnos.ini Files, {username} INI, and $MAC
INI Files.
CCMDefault — Default is no. Yes/no option to enable the
Configure Cloud management dialog will display during boot
up. If CCMDefault=yes is specified and both the CCMServer
and GroupKey are NULL, the Configure Cloud management
dialog will display during boot up. Input group code to
connect to the default Cloud Client Manager server and
default MQTT server. The default CCM server is https://
us1.cloudclientmanager.com and default MQTT server is us1-
pns.cloudclientmanager.com.
Parameters for wnos INI files only
13