Deployment Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.5 Hotfix INI Reference Guide
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for wnos INI files only
- Parameters for wnos INI, {username} INI, and $MAC INI files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
Up to 1 Level icon on top. Clicking the icon will display the up
one level folder contents.
IconGroupLayout — Default is vertical. Configures the
direction of the icongroup on the desktop.
PasswordVariables — Default is no. Yes/no option to
support variable mapping ($TN, $UN etc) for a password.
LockTerminal — Default is yes. Yes/no option to lock the
terminal. If set LockTerminal=no, the function of locking
terminal is disabled. It disables the Lock Terminal from a Right
Click on the desktop or from clicking the Shutdown option
> Lock Terminal. It also disables lock terminal even if set
ScreenSaver=minutes; LockTerminal=yes.
ExpireTime — Specifies the signon expiration time. The
range is 0 to 480 minutes. The default is 0 which means no
expiration.
If the value is larger than 480, then 480 is set instead. If the
value is smaller than 0, then 0 is set instead.
After system signon or starting a connection, the expiration
time starts counting. Once the expiration time is reached,
starting a connection by clicking the icon, menu or connection
manager, will bring up a pop up message box to enter the
password. Only if the password is same as the original signon
password, the session starts.
If the terminal is locked and unlocked with the password, the
signon expiration time starts counting again.
UnlockRefresh — Default is yes. Yes/no option to specifies
the refresh action after unlocking the system in classic mode.
Yes — While unlocking, the system will refresh the PNA list to
verify the password.
No — Disables refresh.
SCShowCNName — Default is yes. Yes/no option to force
the use of the CN name of the certificate as the user name
when using smartcard signon. The default uses the UPN name
as the user name.
SCSecurePINEntry — Default is no. Yes/no option to
enable Secure PIN entry function for pkcs15 smart card with
Cherry keyboard.
AutoConnectTimeout— Default is 30 seconds.
This option sets the timeout for auto connect published
application. The range is 10 seconds to 300 seconds.
DisableEditDomain— The optional keyword
DisableEditDomain, is set to yes to stop typing in the domain
box manually. Typing the character @ or \ as in the format
domain\user and user@domain in the username box are not
allowed.
AdGroupPreFix— The option AdGroupPreFix is only valid,
when you configure SignOn=NTLM. If the option is
configured, then the thin client verifies the names of all AD
groups to which a sign-on user belongs, to get the first group
name so that its prefix matches adgrpnameprefix, and load
adgroup/"the_whole_ad_group_name".ini, if the configuration
file exists, before loading the user specific INI.
38
Parameters for wnos INI files only