Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
Touch_XYReverse — Default is no. Yes/no option to denote
a reversal of the X and Y coordinates which are needed for
some touch screens.
Touch_type — Default is elo. Specifies the type of
touchscreen being used.
NOTE: Options must be specified in the order
shown.9035366678
SessionConfig=ALL
[unmapprinters={no, yes}]
[unmapserials={
no, yes}]
[smartcards={no, yes}]
[mapdisks={no, yes}]
[disablesound={no, yes, 2}]
[unmapusb={
no, yes}]
[DisksReadOnly={no, yes}]
[MouseQueueTimer={0–99}]
[WyseVDA={
no, yes}]
[WyseVDA_PortRange=startPort, endPort]
[UnmapClipboard={no, yes}]
[DefaultColor={0,1,2}]
[VUSB_DISKS={yes, no}]
[VUSB_AUDIO={yes, no}]
[VUSB_VIDEO={yes,
no}]
[VUSB_PRINTER={yes, no}]
[FullScreen={no, yes}]
[Resolution={default, vga_resolution}]
[DisableResetVM={no, yes}]
[WyseVDAServerPort=serverPort]
[FontSmoothing={
yes, no}]
[AutoConnect={yes, no}]
[MultiMonitor={yes, no}]
[EnableImprivataVC={yes,no}]
[Locale=LocaleID]
[SessionLogoffTimeout=seconds]
[GroupSession={yes,no}]
SessionConfig — Specifies the default settings of the
optional connection parameters for all sessions.
unmapprinters — Default is no. Yes/no option to un-map
printers.
unmapserials — Default is no. Yes/no option to un-map
serials.
smartcards — Default is no. Yes/no option to use
smartcards.
mapdisks — Default is no. Yes/no option to map disks.
disablesound — Default is no. Yes/no option to disable
sound. If value is set to 2, the sound at remote computer is
disabled.
unmapusb — Default is no. Yes/no option to un-map USBs.
DisksReadOnly — Default is no. Yes/no option to mount
mass storage disks as read-only.
MouseQueueTimer — Specifies the default queue timer of a
mouse event in an ICA or RDP session (in 1/100 of a second).
It can be used to adjust the bandwidth of a network.
WyseVDA — Default is no. Yes/no option to enable Virtual
Desktop Accelerator for all ICA and RDP sessions.
WyseVDA_PortRange — Sets the ThinOS VDA client port
range. The port range must follow these rules:
1. The port range is a list of start port and end port
separated by a semicolon (;) or a comma (,).
2. Both ports must be between 1 and 65535.
3. The end port must be greater than start port.
For example, WyseVDA_PortRange=3000,3010, the start port
is 3000, the end port is 3010.
UnmapClipboard — Default is no. Yes/no option to disable
clipboard redirection for all sessions. For ICA and RDP,
specifies if redirecting the clipboard. This setting in wnos.ini
will be saved into nvram, if EnableLocal parameter is set to
yes in wnos.ini.
DefaultColor — Specifies the default color depth to use for
the session 0=256, 1=High color, 2=True Color.
VUSB_DISKS — Default value is yes.
VUSB_AUDIO, VUSB_VIDEO, and VUSB_PRINTER —
The default value is no. The options specifies if these USB
84
Parameters for wnos INI, {username} INI, and $MAC INI files