Reference Guide
Parameter Description
password={plain text password}
Password-enc={encrypted password}
nand ash, or on the memory. The length of the lename, including
the trailing period and the le extension, is limited to 64 characters.
AddCerticate must be used when conguring the Citrix Secure
Gateway PNAgent Interface (PNAgent/Lite servers) in the
Network Setup dialog box.
Adding certicates are required if the user CSG environments use
certicate agents that are not covered by the built-in certicates.
The certicates are used to validate server identities by the thin
client. Supported les include .crt le on ICA CSG; .cer and .pfx in
802.1x. Password and Password-Enc are specially used with PFX
les.
CaradigmServer=vip list
[EGPGroup=group name]
[EnableLogO={yes,no}]
[SecurityMode={default, full, warning, low}]
[DisableManualLogon=yes, no]
CaradigmServer=vip list contains a list of VIP addresses with
optional TCP port number of Caradigm servers. EGPGroup denes
the user group name. If EnableLogO=yes is specied, the user is
logged o from the session before system signs o. Otherwise the
session is disconnected. The logged o user has a timeout value
which can be set using SessionCong parameter
SessionLogOTimeout.
The default timeout value is 1, if no SessionLogOTimeout is
specied.
SecurityMode species the SSL certication validation policy.
If set to default, it applies the SecurityPolicy setting.
If set to full, the SSL connection needs to verify server certicate.
If it is untrusted, drop the connection.
If set to warning, the SSL connection needs to verify server
certicate.
If it is untrusted, it is up to you to continue or drop the connection.
If set to low, the server certicate is not checked. The value is
persistent, the default value of the setting is default.
DisableManualLogon is set to yes to disable user to manually enter
credentials to authenticate into the device. It only allows an already
enrolled proximity badge and in active grace period to authenticate
with a single badge tap. The default value is no
Community=community
[Encrypt={yes, no}]
Species the SNMP community name. A string up to 31 characters
are allowed. After the value is specied, it is saved in the non-
volatile memory.
If encrypt=yes, an encrypted string is used as a community name.
The default value is set to no.
NOTE: Use our Windows Password_Gen tool or built-in
tool to generate the encrypted string.
ConnectionBroker={default, VMware, Microsoft, Quest, AWS}
[IgnoreProle={yes, no,}]
[SecurityMode={Default,Low,Warning,Full}]
[EnableVWGateway]={yes, no}
Default value is default. Species the type of VDI broker to use.
Default is a 3rd party VDI broker.
AWS is Amazon Workspace broker. It is only available with PCoIP
build.
IgnoreProle — Default value is no.
Parameters for wnos INI les only 19