Reference Guide

Parameter Description
Orientation — Default is hort. Sets which style is used for display.
Hort means horizontal and vert means vertical.
Align — Sets how screens are aligned: Top means screens are top
aligned in hort orientation. Left means screens are left aligned in
vert orientation.
Center means screens are center aligned. Bottom means screens
are bottom aligned in hort orientation. Right means screen are right
aligned in vert orientation.
Taskbar — Default is wholescreen. Sets which style is used for the
taskbar: wholescreen places the taskbar at the bottom of the entire
screen; mainscreen places it at the bottom of the main screen. This
is only when SysMode=Classic and has no eect on VDI mode.
MonitorAutoDetect — Determines whether or not the system will
detect how many monitors are connected. If only one monitor is
connected, Span mode will be transferred to Mirror mode.
Swap — Default is no. Yes/no option to use with older ThinOS 7.x
builds to swap dual monitors when Mainscreen=2 is set. Swap=yes
puts monitor 2 on the left or top of monitor 1 according to the
orientation.
For example, if you want a standard dual screen layout you would
use:
DualHead=Yes \ Mainscreen=1 \ Orientation=Hort
\ Taskbar=Mainscreen \ Align=Center
Screen=1 Resolution=DDC Refresh=60 Rotate=None
Screen=2 Resolution=DDC Refresh=60 Rotate=None
EnsureDpIsOn—The optional keyword is only used for Wyse 5010
thin client with ThinOS, Wyse 5010 thin client with PCoIP, Wyse
5060 thin client with ThinOS and Wyse 5060 thin client with
PCoIP. When EnsureDpIsOn is set to yes, D-class will halt at boot
time until DP monitor is plugged in.
EnableRAVE={
yes, no}
Default is yes.
Yes/no option to enable the client to use Citrix Multimedia
Acceleration (RAVE) to play supported media les residing on an
ICA server. This is a global parameter for all ICA connections.
EnableRAVE=yes is default.
NOTE:
If EnableRAVE=no or this parameter is not present, the TCX
Multimedia will be used for all media les. If
EnableRAVE=yes, RAVE will be used only for media les it
supports.
EnableRAVE=yes is ignored unless a valid TCX Multimedia
license is used.
FileServer=List of {IP address, DNS name}
[Username=username]
[Password=password]
[SecurityMode={Low, Warning, Full, default}]
FileServer — Species the FTP or Web (http://) server IP address
or DNS name that is entered into thin client local setup (non-volatile
memory); the thin client immediately uses this server to access
les.
Username — Species the username of the le server.
Password — Species the password of the le server.
24 Parameters for wnos INI les only