Reference Guide
Parameter Description
home directory and the le, is limited to 128 characters. If auto dial-
up is enabled, this statement is invalid.
HealthCastServer=vip list
[LogLevel={0, 1, 2 ,3}]
[SecurityMode={default, full, warning, low}]
[ClientCerticate=certicate le name]
Species a list of VIP addresses with optional TCP port number of
HealthCast servers.
LogLevel—The option LogLevel is for debug purpose; 0 means no
log.
SecurityMode —Species the SSL certication validation policy. If
set to default, it will apply SecurityPolicy setting. If set to full, the
SSL connection needs to verify server certicate. If it is untrusted,
then drop the connection. If set to warning, the SSL connection
needs to verify server certicate. If it is untrusted, you may still
continue or drop the connection. If set to low, the server certicate
will not be checked. The value will be persistent, and the default
value of the setting is default.
ClientCerticate —The option species the client certicate le
name during SSL connection between Healthcast server and client.
INACTIVE=minutes
[NoSessionTimer=minutes]
[LockTimer=seconds]
Default is 0. There is no Idle timeout. The range is 0 minutes to 480
minutes.If the value given is bigger than 480, 480 is set instead. If
the value given is smaller than 0, 0 is set instead.
When the system idle is time out in the congured minutes, the
system will automatically sign o, reboot or shutdown which are
based on the setting of AutoSigno.
NoSessionTimer— The parameter NoSessionTimer has the same
range as INACTIVE and it is valid only if INACTIVE value is not 0. If
there is a session use the value of Inactive, otherwise use the value
of NoSessionTimer, if NoSessionTimer is congured.
If AutoSigno=yes Shutdown=yes is congured, then this
statement can work before signon.
If AutoSigno=yes Reboot=yes is congured, this statement can
work before signon.
LockTimer—If the parameter LockTimer is set, the terminal is
locked and the system idle is timeout in the congured seconds;
System will automatically sign o, reboot or shutdown based on the
setting of AutoSigno.
LongApplicationName={no, yes}
Default is no.
Yes/no option to display all 38 characters in a desktop icon name. If
LongApplicationName=no, then icons will display up to 19
characters; any over 19 characters and the last three characters will
be “…”.
MaxVNCD={0, 1}
[VNCD_8bits={yes,no}]
[VNCD_Zlib={yes, no}]
Default is 0.
Option to enable VNC shadowing. Default value is 0 means VNC
shadowing is disabled. Set to 1 to enable shadowing.
NOTE:
Only one VNC client session is allowed and a password is
required.
26 Parameters for wnos INI les only