Reference Guide

Parameter Description
environment during this phase, please add https:// as the prex for
ScepAdminUrl to use HTTPS instead of the default HTTP protocol.
Use ScepAutoEnroll=no AutoRenew=yes to only enable SCEP auto
renew; all other parameters are not needed if ScepAutoEnroll is set
to no.
NOTE: SCEP server’s URL must be an HTTP or HTTPS
link. Do not add protocol prex to RequestURL and
ScepAdminURL.
SelectServerList={PNA, VDI}
[Default=default_desc]
list of servers {Server1; Server2; ...ServerN}
Allows users to select one PNA or VDI server during logon. For
server use the format:
description = <server’s description> host = <server’s
url> [ <options>]
NOTE: There must be “description” and “host” key words
on each server.
For PNA server options, use the options of the PnliteServer
parameter in Connection Settings: wnos.ini les, {username} INI,
and $MAC INI Files.
PNA example:
SelectServerList=PNA; Default=test3;
description = test1; host =
192.168.0.10; autoconnectlist
=*; reconnectfrombutton=0; description = test2;
host = HostName2.wyse.com; TimeOut=200;
descriprion = test3 host =
https://
server3.wyse.com
For a VDI server: If you want to use a VDI broker, specify
ConnectionBroker in wnos.ini. Otherwise the VDI broker’s type is
default.
VDI example:
ConnectionBroker=VDM SelectServerList=VDI;
Default=test5 description = test4; host =
192.168.0.11; description = test5; host =
host2.wyse.com
The Default option following "SelectServerList={PNA, VDI}" can
specify the default server. The value is one of server description
dened after that. After one selects another server and sign o,
this default server is selected. If default option is not specied, the
last selected server is selected in the next sign on.
Service={snmpd, thinprint, vncd, wdm,
vda <port number>} disable={no, yes}
Service — Species the services you can enable or disable; there
are dierent syntaxes for the dierent services.
disable — Default is no. Yes/no option to disable the services.
Disable must follow the Service parameter.
Service=snmpd disable={no, yes}
[community=<snmp_community> [encrypt={yes, no}]]
[communityReadOnly=<snmp_community_read_only>
[encrypt={yes, no}]]
Default is no.
Service=snmpd disable — Yes/no option to disable the snmpd
service.
community — The option community is same as the statement
Community. encrypt option is same as that in the statement
community.
34 Parameters for wnos INI les only