Reference Guide
Parameter Description
Encrypt—This option species whether or not the password is encrypted. For
example, ResourceUrl=yes type=picture url=ftp://10.xxx.xxx.xx/pic1 user=pteng
password=xxxxxx encrypt=no
**ScreenSaver=value{0, 1, 3, 5, 10, 15, 30}
[LockTerminal={0, 1, 2, 3}]
[Type={0, 1, 2, 3, 4}]
[VideoLink=httplink]
[VideoSpan=no]
[Unit=hour]
[Image=imagele]
[PictureTimer={2-60}]
[PictureOrder=random]
[PictureCheck=always]
[PictureLayout={stretch, tile, center}]
[Sleep={0-180}]
Screensaver— Species to put the thin client in a screensaver state when the time
limit for inactivity is reached, that is delay before starting is reached.
Default value is 10. Value and delay before starting the screensaver:
0 — Disabled
1 — 1 Minute
3- 3 Minutes
5 — 5 Minutes
10 — 10 Minutes
15 — 15 Minutes
30 — 30 Minutes
The default screen saver value is 10 minutes and the maximum value is 180 minutes. If
the value is not specied in the table, it is added to the drop down list in the GUI.
LockTerminal— This is an optional parameter and species to put the thin client in
LOCK state when the screen saver is activated. Default is 0.
0 — Disabled.
1 — Puts the thin client in a LOCK state when the screen saver is activated. The
wallpaper is shown and the user is prompted with an unlock dialog box to enter the
sign-on password to unlock the thin client. LockTerminal settings are saved into
NVRAM if LockTerminal=1and EnableLocal=yes is set in the wnos.ini le.
2— Puts the thin client in a LOCK state when the screen saver is activated, however,
the wall paper cannot be viewed when the user is prompted with an unlock dialog box
to enter the sign-on password to unlock the thin client.
3— Puts the thin client in a LOCK state when the screen saver is activated, and the
username and password are needed to unlock the terminal. The wallpaper is not shown
and the Password eld in the Unlocking window is invisible until you have entered the
username.
When you click OK or press the Return key, a message box pops up to input the
username and password to unlock the terminal.
NOTE
:
The user must be signed on with a password for a Lock action to take eect. If
set in KeySequence, users can lock the thin client at any time by pressing Ctrl
+Alt+Left arrow or Ctrl+Alt+Right arrow.
Unit — This parameter converts the screen saver timer value from minutes to hours
to set longer time.
Type — Species which type of screensaver to use.
0 — Blank the Screen
1 — Flying Bubbles
2 — Moving Image
58
Parameters for wnos INI, {username} INI, and $MAC INI les