Reference Guide

Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
DisableWlan— Used to disable the wireless connection. If
DisableWlan=EnetUp, and the Ethernet is on while booting, the
wireless connection is disabled.
Device=Wireless Mode=Infrastructure
SSID=ThinIsIn
IEEE8021X=yes network=wireless
profile=ThinIsIn access=WPA2-ENT
eap=yes eaptype=EAP-PEAP peapeap=EAP-MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_95 roamsensitive=high
IEEE8021X=yes network=wireless profile=wtos_95
access=WPA2-ENT
eap=yes eaptype=EAP-PEAP peapeap=EAP-MSCHAPV2
Device=Wireless Mode=Infrastructure
SSID=wtos_11n
IEEE8021X=yes network=wireless
profile=wtos_11n access=WPA2-PSK
wpa2pskpwd=2wsx3edc
Device=Wireless
Priority="wtos_11n,wtos_95,ThinIsIn"
RoamScanChannelTime allows you to set the time the thinclient
stays on one channel for scanning the surrounding aps. The default
value is 2.
The RoamScanChannelTime sets the time 10 times the provided
value. The time ranges from 10ms to 150ms.
For example, if you set RoamScanChannelTime=10, the thin client
stays on one channel for 100ms.
If you do not set the value or if the value is out of range, the thin
client reverts to the default value 2.
RoamScanChannelProbes allows you to set the number of probes
the thin client sends out on a channel. The default value is 4.
This value ranges from 1 to 4.
If you do not set the value or if the value is out of range, the
number of probe is reverted to the default value 4.
DISABLETSGW
IMPORTANT: DISCONTINUED. DO NOT USE. See
TSGWENABLE
**EnableLocal={no, yes}
[HideDefault={no, yes}]
Default is no.
Yes/no option to enable locally congured entries to show in the
Connect Manager list. When connections dened in local NV-RAM
are displayed in the Connect Manager, they are marked with an
asterisk.
If EnableLocal=yes is in a wnos.ini le, then the global information
will be saved into NVRAM.
NOTE: The global information includes: SEAMLESS,
ALTERNATE, Reconnect, icaBrowsing, LowBand,
NoReducer, Time settings, and Printer settings in a
wnos.ini le.
HideDefault — Default is no. Yes/no option to hide the default ICA
and RDP connections that are present on the devices.
72 Parameters for wnos INI, {username} INI, and $MAC INI les