Reference Guide
Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
If TapToLock=0, then tap a card to lock terminal is disabled. If
TapToLock=1 (Tap to lock), then use the proximity card to lock the
terminal.
If TapToLock=2 (Tap over), then lock the terminal and log in a
dierent user.
EnableWindowAuthentication — Default is yes. Yes/no option to
sign-on with the user’s Windows credentials to pre-dened broker
if the OneSign sign-on fails.
AutoAccess — Species the corresponding type of broker to
automatically start. If not dened, the broker type is obtained from
the Imprivata Server setting of the computer and user policy. If
none of them is dened, then the rst available broker server from
the Imprivata server is started.
NOTE:
AutoAccess can be set in [username].ini and wnos.ini,
however, the wnos.ini, has priority over [username].ini.
NetBIOSDomainName — Default is no. Yes/no option to enable
the authentication to the broker server using the NetBIOS domain
name. If set to yes, the Imprivata domain list will show NetBIOS
domain name and the card user will authenticate to the broker
server using the NetBIOS domain.
ConnectTimeout species the timeout value for OneSignServer
connection. The value ranges from 0 to 65535 seconds. The value
0 species the default TCP timeout value.
PnliteServer=<List of {IP address, DNS names, or URLs} >
[ReconnectAtLogon={0, 1, 2}]
[ReconnectFromButton={0, 1, 2}]
[AutoConnectList={*/ appname1;appname2; appname3...}]
[Timeout=5…300]
[CAGRSAAuthMethod={LDAP, RSA}]
[CAGAuthMethod={LDAP, RSA, LDAP+RSA, RSA+LDAP}]
[RequestIconDataCount={0-65535}]
[DefaultSettings={XenApp, XenDesktop}]
[SmartcardPassthrough={yes, no}]
[StoreFront={no, yes}]
[HttpUserAgent={UserAgent}]
[CAGSendDomain= {yes, no}]
[SFIconSortMode={0, 1, 2, 3}]
[IgnoreDefaultGateway={yes, no}]
PnliteServer
— Species the list of IP addresses or host names
with optional TCP port number or URLs of PNAgent/PNLite
servers. The list is empty by default.
Each entry with optional port is specied as Name-or-IP:port,
where port is optional; if not specied, port 80 is used as the
default.
If a port other than 80 is used, the port number must be specied
explicitly with the server location in the form IP:port or name:port.
Once specied, it is saved in the non-volatile memory.
The statement PNAgentServer and Web interface for Citrix
MetaFrame Server is equal to this statement.
NOTE:
PnliteServer and the DomainList parameters can be used in a
{username}.ini le, but generally are used only in a wnos.ini
le.
The PNAgent/PNLite server list and associated domain list
optionally can be entered in DHCP server options 181 and
182, respectively. If entered in both places, the entries from
the Connection Settings: wnos.ini les, {username} INI, and
$MAC INI Files will take precedence. However, the
{username}.ini le will override the wnos.ini le if the identical
parameters with dierent values exist in the {username}.ini
le.
Parameters for wnos INI, {username} INI, and $MAC INI les 79