Setup Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.6 INI Reference Guide
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for wnos INI files only
- Parameters for wnos INI, {username} INI, and $MAC INI files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
FontSmoothing — Default is yes. Set no to disable font
smoothing.
AutoConnect — Default is yes. Set no to disable auto
connect function.
MultiMonitor — Default is yes. Sets a multiple monitor
layout. Set MultiMonitor=no to disable multiple monitor layout
function. The session has the same desktop width and height
with local virtual desktop size, spanning across multiple
monitors, if necessary.
EnableImprivataVC— Default is yes. If set to no, the
Imprivata Virtual Channel is disabled. The user can use vusb
redirect instead of Imprivata Virtual Channel mode to use the
Rfideas or finger print device in session as server side remote
device.
Locale— Set Locale=LocaleID to set Locale in session for
localization configuration to work. For information about
LocaleID, refer to link msdn.microsoft.com/en-us/library/
windows/desktop/dd318693(v=vs.85).aspx.
SessionLogoffTimeout—Setting SessionLogoffTimeout
value forces all sessions to logoff when user signs off from
the broker. The default value is 0 which retains the same
behavior as before, and also disconnects the sessions. If you
set a value, for example 30 seconds, broker sign-off waits for
30 seconds for all sessions to finish logoff, then, automatically
session logs off. Broker sign-off will continue. During the
waiting process, one notice prompts for user to check
whether the session stops working if something is not saved.
This feature currently supports Citrix Xen broker sessions and
View Broker sessions only.
GroupSession—Set to enable the function of grouping
sessions and the menu item of Group Sessions is checked
when you right click on the desktop. The default value is no
and the original state of Group Sessions is unchecked.
SessionConfig=ICA
[desktopmode={fullscreen, window}]
[mapdisksunderz]: DISCONTINUED. DO NOT USE.
[TosIpPrecedence={0–5}]
[TosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/
AF11/AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/
AF43/EF}]
[DiskMapTo=a character sequence]
[SysMenu={remote,
local}]
[SessionReliability={
no, yes}]
[WarnPopup={yes, no}]
[ondesktop={
no, yes, all, none, desktops, applications,
ondesktop_list}]
[AudioQuality={default, high, medium, low}]
[USBRedirection={ICA|HDX}]
SessionConfig — Specifies the ICA default settings of the
optional connection parameters for all ICA sessions.
desktopmode — Default is fullscreen. This parameter
specifies the display mode of an ICA published desktop when
using an ICA PNAgent logon. The default option is fullscreen.
mapdisksunderz — DISCONTINUED. DO NOT USE.
TosIpPrecedence — Allows you to set IP Precedence in the
TOS fields.
TosDscp — Sets IP DSCP in the TOS fields.
DiskMapTo — Specifies to map disks to a character
sequence.
NOTE:
A sequence of characters can be used by DiskMapTo, with
each letter mapped to one disk in order. For example, if
RTNM is the sequence, R is mapped to the first disk (in
ThinOS, it will be D:/), T is mapped to the second disk (in
90 Parameters for wnos INI, {username} INI, and $MAC INI files