Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
AudioQuality — Default is default. Specifies the audio
quality of ICA sessions.
NOTE: Medium quality is recommended for Speech
scenarios. For example: SessionConfig=ICA
AudioQuality=high
USBRedirection — Default is ICA|HDX. Option to select the
channel of usb devices redirection. This option is
recommended to replace the older setting device=vusb
type={HDX}.
ZLKeyboardMode — Specifies to accelerate the display of
the input text on the client device over a high latency
connection. 0=off, 1=on, 2=auto
ZLMouseMode — Specifies to accelerate the visual
feedback for mouse-clicks on the client device over a high
latency connection. 0=off, 1=on, 2=auto
SucConnTimeout— This option will enhance the seamless
session share. During the first session logon, immediately start
second or later sessions, which will wait for the time set with
SucConnTimeout (or the logon success) to make sure new
applications share with the first logon session.
HDXFlashUseFlashRemoting— Default is Always, which
means the HDX is enabled always. The value Never is to
disable HDX.
HDXFlashEnableServerSideContentFetching— Default is
Disabled, which means the server side fetching content is not
enabled. The value enabled is to enable this function.
EnableRTME— This option controls the launch of RTME
service. The default value is enabled.
FlipByTimer— This option selects the screen refresh
method. For some old server, there is no EndOfFrame
transferred to the client. Then we can use this option to fix
such issues.
RefreshTimeOut—RefreshTimeOut triggers auto-refresh
which updates ICA applications automatically. The value
format dd:hh:mm, indicate days&&hours&&minutes as the
auto-refresh interval. The default value is 0, that disables
auto-refresh.
Continued from the previous table...
Timeout—This option controls the credential prompt after
ICA broker logon was timeout. Session ticket is invalid now. If
yes, users have to enter their credential to re-login to launch
session, if no, ThinOS will use the default credential to do
login in background. The default is yes.
NOTE: Other Citrix INI parameters are not listed here.
However, these Citrix INI parameters are supported on
ICA connection by using INI SessionConfig=ICA.
PasswordExpireNotify —This option enables the password
expire notification, which should configure in storefront server
side, Authentication, password change set as At any time.
92 Parameters for wnos INI, {username} INI, and $MAC INI files