Deployment Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.5 Hotfix INI Reference Guide
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for wnos INI files only
- Parameters for wnos INI, {username} INI, and $MAC INI files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files (continued)
Parameter Description
IconTextColor — Specifies the icon text color in RGB string format that must
be enclosed in quotes, where rrr, ggg and bbb are decimal numbers in the range
of 0 to 255.
Device=DellCmos
[CurrentPassword=password]
[CurrentPasswordEnc=password encrypted]
[NewPassword=password]
[NewPasswordEnc=password encrypted]
[Audio={yes, no}]
[AdminLock={yes, no}]
[AutoPower={Disable, Daily, Workday, Days}
]
[AutoPowerTime=hh:mm]
[AutoPowerDays={Sunday, Monday, Tuesda
y, Wednesday, Thursday, Friday, Saturday}]
[ACRecovery={PowerOff, PowerOn,
LastState}]
[USBRearPort={yes, no}]
[USBFrontPort={yes, no}]
[WakeOnLan={Disable, LAN, PXE}]
[WakeOnUSB={yes, no}]
[USBBootSupport={yes, no}]
[PXEBootSupport={yes, no}]
Action={extract, restore}
These INI parameters are applicable to thin clients with Dell standard BIOS.
Supported platforms:
● Wyse 3040 thin client with ThinOS
● Wyse 3040 thin client with PCoIP
NOTE: All DellCmos settings, except CurrentPassword and
CurrentPasswordEnc, take effect after power off restart.
CurrentPassword—This option provides the
current BIOS password for changing BIOS settings when device's admin passwo
rd is available.
CurrentPasswordEnc—
This option is used to provide encrypted current password.
NewPassword—This option is used to change device's password. Current
Password is not required if device's admin password is not available.
NewPasswordEnc—This option is used to provide encrypted new password.
NOTE: Password encrypted is of higher priority. For example: If both
CurrentPassword and CurrentPasswordEnc are configured, then
CurrentPasswordEnc overwrites the CurrentPassword.
Audio—
This option enables or disables the integrated audio controller. BIOS default valu
e is yes. All Dell BIOS settings take effect after the power off restart.
AdminLock—When enabled, this option
prevents user from entering setup when an admin password is set. Default value
is no.
AutoPower—This option sets the time of day when you want the system to
automatically turn on.
No/Disable—The system does not automatically power up; Yes/Daily—
The system power ups every day at the time specified in AutoPowerTime; Work
day—
The system power ups Monday through Friday at the time specified in AutoPow
erTime; Days—The system power ups on the days specified in AutoPowerDays;
AutoPowerTime—This option specifies the
auto power on time, value range of hh is 0 to 23, while mm is 0 to 59.
AutoPowerDays—
This option specifies the days to power up system automatically. For example,
Device=DellCmos AutoPower=Days AutoPowerTime=2:30 AutoPowerDays=Sun
day; Friday; Saturday.
ACRecovery—
This option specifies how the system behaves when AC power is restored after
an AC power outage.
● PowerOff—System stays off after AC power is restored.
● PowerOn—System powers on after AC power is restored.
● LastState—System will keep the last power state as the last/previous state
of the system was before AC power was removed.
USBRearPort—
If yes is specified, devices attached to the rear USB port are enabled,
Parameters for wnos INI, {username} INI, and $MAC INI files
47