Deployment Guide

Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files (continued)
Parameter Description
After no mouse and keyboard input in 1 minute, the system will pop up a counter
down window to shut down in 30 seconds. You can cancel it.
EnablePeripherals—If the optional EnablePeripherals is set with
Privilege=none, the specified peripherals tab will be enabled. The value of the
option can be a list of any valid value separated with "," or ";". For Camera,
Touchscreen and Bluetooth, they can be enabled only, if the devices are
available.
For example, Privilege=none lockdown=yes
EnablePeripherals=mouse,audio,camera,bluetooth, then mouse and audio
tab will be enabled. If there are camera and/or bluetooth devices,
the camera and/or bluetooth tab will be enabled too. The optional
EnableKeyboardMouseSettings=yes can be replaced as: Privilege=none
lockdown=yes EnablePeripherals=keyboard,mouse.
FastDHCP— FastDHCP identifies the gateway first. If the gateway is same as
the network before disconnection and the previous DHCP information is valid,
the same information is used. The default value is yes.
TCPTosDscp—Use this option to set the TOS field of all TCP packets when
the fields are not pre-configured by other INI settings.
UDPTosDscp—Use this option to set the TOS field of all UDP packets
when the fields are not pre-configured by other INI settings.Added new
sheet TOS_Priority_settings for TosDSCP INI, which is merged from
TOS_Priority_settings.docx.
HideWlanScan—Use this option to disable WIFI scan in lockdown mode. The
default value is no.
ResourceURL={yes, no}
[Type={Picture, Firmware, Package}]
[URL=_url_path_]
[User=_user_name]
[Password=_password_]
[Encrypt={yes, no}]
The resource files have their specified default path in file server, for example,
the pictures for Showing Picture screen saver are from the folder /wnos/
picture in file server (default), and the bitmap are from /wnos/bitmap.
ResourceURL—If this option is set to yes, the subsequent options are use to
configure one or more resource URL. The system fetches the resource files
from the new URL.
If this option is set to no, all the subsequent options are to be ignored.
Type—This option specifies the resource type. Currently, only Picture is
supported, which is for showing picture screen saver.
Type=Picture—This option specifies the URL of pictures for Showing
Picture screen saver.
Type=Firmware—This option specifies the URL for ThinOS image, BIOS
image, hosts, printermap and noticefile.
Type=Package—This option specifies the URL for packages.
Example:
ResourceUrl=yes \
type=picture url=ftp://10.xxx.xxx.xx/pic1 user=pteng
password=xxxxxx
encrypt=no \
type=firmware url=http://10.xxx.xxx.x/wnos1
user=administrator
password=XXXXXX encrypt=yes \
type=package url=https://10.xxx.xxx.xxx/wnos/pkg2
user=abc
password=yyyy
56
Parameters for wnos INI, {username} INI, and $MAC INI files