Deployment Guide

Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files (continued)
Parameter Description
URL—This option specifies a new URL of the resources.
User and Password—These options specify the credentials of the new
resource URL.
Encrypt—This option specifies whether or not the password is encrypted.
For example, ResourceUrl=yes type=picture url=ftp://10.xxx.xxx.xx/pic1
user=pteng password=xxxxxx encrypt=no
**ScreenSaver=value{0, 1, 3, 5, 10, 15, 30}
[LockTerminal={0, 1, 2, 3}]
[Type={0, 1, 2, 3, 4}]
[VideoLink=httplink]
[VideoSpan=no]
[Unit=hour]
[Image=imagefile]
[PictureTimer={2-60}]
[PictureOrder=random]
[PictureCheck=always]
[PictureLayout={
stretch, tile, center}]
[Sleep={0-180}]
Screensaver— Specifies to put the thin client in a screensaver state when the
time limit for inactivity is reached, that is delay before starting is reached.
Default value is 10. Value and delay before starting the screensaver:
0 — Disabled
1 — 1 Minute
3- 3 Minutes
5 — 5 Minutes
10 — 10 Minutes
15 — 15 Minutes
30 — 30 Minutes
The default screen saver value is 10 minutes and the maximum value is 180
minutes. If the value is not specified in the table, it is added to the drop down
list in the GUI.
LockTerminal— This is an optional parameter and specifies to put the thin
client in LOCK state when the screen saver is activated. Default is 0.
0 — Disabled.
1 — Puts the thin client in a LOCK state when the screen saver is activated.
The wallpaper is shown and the user is prompted with an unlock dialog box to
enter the sign-on password to unlock the thin client. LockTerminal settings
are saved into NVRAM if LockTerminal=1and EnableLocal=yes is set in the
wnos.ini file.
2— Puts the thin client in a LOCK state when the screen saver is activated,
however, the wall paper cannot be viewed when the user is prompted with an
unlock dialog box to enter the sign-on password to unlock the thin client.
3— Puts the thin client in a LOCK state when the screen saver is activated,
and the username and password are needed to unlock the terminal. The
wallpaper is not shown and the Password field in the Unlocking window is
invisible until you have entered the username.
When you click OK or press the Return key, a message box pops up to input the
username and password to unlock the terminal.
NOTE:
The user must be signed on with a password for a Lock action to take
effect. If set in KeySequence, users can lock the thin client at any time by
pressing Ctrl+Alt+Left arrow or Ctrl+Alt+Right arrow.
Unit — This parameter converts the screen saver timer value from minutes to
hours to set longer time.
Type — Specifies which type of screensaver to use.
0 — Blank the Screen
1 — Flying Bubbles
2 — Moving Image
3 — Showing Pictures
Parameters for wnos INI, {username} INI, and $MAC INI files
57