Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[disablewmv3={no, yes}] disablejpeg — Default is no. Yes/no option to disable the
jpeg codec when playing video.
disablewmv1 — Default is no. Yes/no option to disable the
wmv1 codec when playing video.
disablewmv2 — Default is no. Yes/no option to disable the
wmv2 codec when playing video.
disablewmv3 — Default is no. Yes/no option to disable the
wmv3 codec when playing video.
**NoReducer={no, yes}
Default is no — Enables compression.
Yes/no option to turn off compression. To turn off
compression, enter yes. Used here this parameter is a global
statement for all connections. It sets the default value of
NoReducer.
NOTE:
By default both the ICA and RDP protocols compress
their data to minimize the amount of data that needs to
traverse the network.
This compression can be as much as 50 percent for text-
based applications such as Microsoft Word and 40 percent
less for graphics applications than the uncompressed data
streams.
OneSignServer=onesign_server
[DisableBeep={no, yes}
[KioskMode={
no, yes}]
[EnableFUS={no, yes}]
[TapToLock={0, 1, 2}]
[EnableWindowAuthentication={yes,no}]
[AutoAccess={VMW,XD,XA}]
[NetBIOSDomainName={
no, yes}]
[ConnectTimeout={0 ~ 65535}]
Specifies a list of host names or IP addresses with optional
TCP port number or URLs of Imprivata OneSign servers.
NOTE: An https protocol must be used.
OneSign virtual desktop access offers a seamless
authentication experience and can be combined with single
sign-on for no click access to desktops and applications in a
virtual desktop environment.
The following inputs are acceptable values:
https://ip
or
https://FQDN
DisableBeep — Default is no. Yes/no option to set the
Rfideas reader to mute when a card is tapped.
KisokMode — Default is no. Yes/no option to allow the
OneSign user to share the client desktop.
EnableFUS — Default is no. Yes/no option to set the Citrix
client to remain running when switch users.
TaptoLock — Default is 2. Only active when KioskMode=yes.
Specifies tap to lock.
If TapToLock=0, then tap a card to lock terminal is disabled.
If TapToLock=1 (Tap to lock), then use the proximity card to
lock the terminal.
If TapToLock=2 (Tap over), then lock the terminal and log in a
different user.
Parameters for wnos INI, {username} INI, and $MAC INI files
77