Deployment Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.5 Hotfix INI Reference Guide
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for wnos INI files only
- Parameters for wnos INI, {username} INI, and $MAC INI files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
3—sorts in alphabetic with application first.
IgnoreDefaultGateway—When the value is Yes, the default
gateway of the selected store during Netscaler login is
ignored. Always use pnliteserver to continue. When the value
is set to no, the Netscaler server is used as default gateway
to reset the login again. The default value is no.
CAGUserAsUPN—This value allows the client to send
username to server in the format username@fqdn, similar
to an email address. Third party authentication for Netscaler
uses this format. Example: Okta authentication.
CAGExternal—This value allows CAG login with external
network mode directly without check beacons and reduces
login time.
DisableSFInit—This value disables storefront initialization
process when you turn on the thin client. This is because,
the storefront initialization process takes time to start which
is not required during logon.
RTPTosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/
AF11/AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/
AF43/EF}
Sets RTP/UDP audio channel in the TOS fields.
SaveSysinfo={usb, _proto_, _full_url_}
[ScardLog=0xF ]
[Username=_username_]
[Password=_password_]
[Size=_file_length_limit]
[Append={yes, no}]
Configure the target clients to save the event logs.
full_url—If set as a specified full url name, it
is saved into the specified url. Otherwise, it is
saved as a file name, such as /wnos/troubleshoot/
{TERMNAME}_LOG_{DATE}_{TIME}.txt.
usb—If set to usb, it is saved into the last mounted USB disk.
proto—If set to a protocol, for example, ftp, http or https, it
is saved into the file server with this protocol.
Scardlog—The Smart card Log option is a bit mask to control
the following logs:
● 0x1 Context log
● 0x2 Handle log
● 0x4 Status log
● 0x8 Transfer log
Username and Password—The options specify the account
of the file server or url. If not set, the default account of file
server is used.
Size—This option specifies the file size limitation. When the
file is greater than the specified size, the file will be cleared.
Append—This option appends the event log to the same file
name instead of creating a new file. It is only valid for full url
with ftp. The protocol http or https is also supported from
8.4.1 release.
For example, savesysinfo=http://10.151.121.3/
wnos/yyy.txt username=administrator
password=wyseatc append=yes Size=4000.
Parameters for wnos INI, {username} INI, and $MAC INI files
81