Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
The event log file yyy.txt is appended in every boot-up. If
the file size is up to 4000 bytes, then the file is cleared and
continues to save the log.
**Seamless={no, yes}
[HideTaskbar={0, 1, 2, 3}]
[FullscreenReserved={
no, yes}]
Seamless — Default is no. Yes/no option to set the default
resolution for ICA published applications to Seamless for ICA
connection parameters.
HideTaskbar — Default is 0. Specifies the status of the
taskbar when maximizing the seamless window.
0 — Do not hide the taskbar.
1 — Taskbar will be hidden when maximizing the seamless
window to full screen. Moving the mouse over the lowest
bottom of the screen will display the taskbar. This setting
excluding the FullscreenReserved parameter in a wnos.ini file
will be saved into NVRAM if EnableLocal=yes is set in the
wnos.ini file.
NOTE:
● When set Seamless=yes HideTaskbar=2, it removes
the auto-hide taskbar function but it reports the
full resolution to the ICA server in a similar way to
HideTaskbar=1.
● When set Seamless=yes HideTaskbar=3, the
maximized size does not cover the taskbar, but the
session size on the server side is reported as the full-
screen size.
● When set Seamless=yes FullscreenReserved and the
applications are configured for fullscreen mode, they
will be launched in fullscreen mode, not seamless
mode.
SecureMatrixServer=<SecureMatrix Server
Host name or IP address/FQDN or URL>
[EnableSelectTable]
Specifies the Host name or IP address/FQDN or URL of the
Secure Matrix server. Http or https protocol usage is decided
by the server configuration. If SecureMatrixServer is defined,
the user must pass authentication with the Secure Matrix
server first, and then there is a seamless log in to the brokers
if the server can provide the correct broker credentials, if not,
the user must enter broker credentials to log in.
For Example: SecureMatrixServer=https://gsb01.bjqa.com
NOTE:
Before using this parameter, use the Secure Matrix
documentation to set up the Matrix Server. Also, be sure
you import the relevant GSB Server Certificate file when
using https.
EnableSelectTable enables you to select the table type (3 or 4
tabs) when you change the password (SMXBridge server 3.9
start supports this feature). Default value is No.
SelectGroup={
no, yes}
[Default=default_desc]
Default is no.
82 Parameters for wnos INI, {username} INI, and $MAC INI files