Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
SessionConfig=PCoIP
[USBRedirection={PCoIP, TCX}]
[ShowDisconnectMessage={
yes, no}]
[ShowReconnectMessageTime=seconds]
[ResumeTimeout=seconds]
[DisableRTAV={yes, no}]
SessionConfig — Specifies the PCoIP default settings of the
optional connection parameters for all PCoIP sessions.
USBRedirection — Default is PCoIP. Specifies the channel
of USB devices redirection.
ShowDisconnectMessage — Default is yes. Yes/no option
to display a disconnect message when a session is
disconnected. If set to yes, the message is displayed; if set
to no, the message will only show in the Event Log.
ShowReconnectMessaageTime— This option specifies the
number of seconds to show the session reconnect message
box after the session detects the network congest. The
default value is 50 seconds.
ResumeTimeout—The option ResumeTimeout specifies the
number of seconds to wait after the reconnection dialog box
prompts, and before the session successfully reconnects. If
timeout value is reached then the session is closed. The
default value is 1200 seconds.
DisableRTAV—The default value is no. RTAV virtual channel
may impact the performance of audio or video related
applications. For the parameter DisableRTAV, when the value
is set toYes the RTAV virtual channel in session is disabled.
SessionConfig=RDP
[MaxBmpCache={128 to 1024}]
[EnableNLA]={no,
yes}]
[ForceSpan={no, yes}]
[EnableTSMM={yes, no}]
[EnableGFX]={yes, no}]
[EnableVOR={
yes, no}]
[EnableRdpH264]={yes, no}]
[EnableRecord={yes, no}]
[EnableRFX={
yes, no}]
[USBRedirection={TCX, RDP}]
[RDPScreenAlign4={yes,no}]
[WallPaper={yes, no}]
[Dragging={yes, no}]
[Animation={yes, no}]
[Theme={
yes, no}]
[TosIpPrecedence={0-5}]
[TosDscp={Default/CS1/CS2/CS3/CS4/
CS5/CS6/CS7/AF11/AF12/AF13/AF22/AF23/
AF31/AF32/AF33/AF42/AF43/EF}]
[AutoDetectNetwork={yes, no}]
[TSGWEnable={
yes, no}]
SessionConfig — Specifies the RDP default settings of the
optional connection parameters for all RDP sessions.
MaxBmpCache — Specifies the maximum bitmap cache
number. This impacts the memory usage of an RDP session.
EnableNLA — Default is yes. Yes/no option to utilize the
Network Level Authentication feature in RDP 7.
ForceSpan — Default is no. Yes/no option to disable RDP
Multi Monitor feature.
EnableTSMM — Default is yes . Yes/no option to enable
RDP7 Multi-media redirect.
EnableGFX —The option when set to yes, enables RDP8
Pipelined Graphics feature. Default is yes for all platforms
other than Wyse 3010 thin client with ThinOS (T10). If this
option is configured as no, the option EnableVOR and option
EnableRdpH264 will be internally set to no despite of the
settings in INI.
EnableVOR — Default is yes. H.264. Yes/no option to enable
RDP8 Video Optimized Redirect.
NOTE: The EnableVOR parameter is not supported on C
or V class.
EnableRdpH264— Default is yes. This option enables
RDP8.1 h.264 graphics feature. This option is internally set to
no if the option EnableGFX is set to no manually or by default.
EnableRecord — Default is yes . Yes/no option to enable
RDP feature of recording from local.
EnableRFX — Default is yes. Yes/no option to enable Bitmap
Codec RemoteFX.
Parameters for wnos INI, {username} INI, and $MAC INI files
89