Deployment Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[GracefulReconnTimeout={10 - 100}]
[ForceUpdatedNLA={yes, no}]
[TsgwWebsock={yes, no}]
USBRedirection — Default is TCX . Option to select the
channel of USB devices redirection.
RDPScreenAlign4 — Default is no. RDPScreenAlign4=yes
can force RDP session width to 4 pixels aligned.
For example:
SessionConfig=RDP MaxBmpCache=1024
DefaultColor=1 EnableNLA=yes
ForceSpan=yes EnableTSMM=no
EnableRecord=yes EnableRFX=no
RDPScreenAlign4=no
The options Wallpaper, Dragging, Animation and Theme can
set the RDP experience. Default is yes.
TosIpPrecedence — Allows you to set IP Precedance in the
TOS fields.
TosDscp — Sets IP DSCP in the TOS fields.
AutoDetectNetwork —Default is yes. Yes/no option to
enable an RDP session to adapt its data transfer to band
width of network.
TSGWEnable—Default is yes. Yes/no option to obtain/
enable TS gateway for the applications and desktops from
Microsoft RDS broker server. The default value is yes which
means that the TS Gateway setting is automatically obtained
or enabled from the Microsoft RDS broker server.
GracefulReconnTimeout—This value is to set a timeout for
RDP to reconnect the session if no response is received from
server side during this time limit. It avoids the case of RDP
session freezing for a long time and not reconnecting due
to poor network quality or short time network disconnection.
There is no default value for this option. The feature is
disabled if it is not set. Valid value is 10 to 100, in seconds.
Limitation: Certain sessions in Windows10 servers disconnect
and reconnect when the session is idle with this parameter
enabled. The issue occurs when H.264-AVC444 is enabled
without RemoteFX/vGPU support on server side. You can
avoid the issue by not configuring H.264-AVC444 policy in the
server.
ForceUpdatedNLA—This option allows the client side force
server to use updated CredSSP, which is a remediation of
vulnerability CVE-2018-0886. If the value is set to yes, the
client disconnects the session during session set up when the
server uses unpatched CredSSP. The default value is no.
TsgwWebsock—This option is used to set websocket if a
connection is used between client and Window 2016 Terminal
Service Gateway. The default value is No.
SessionConfig=Blast
[EnableH264={yes,no}]
[NetworkCondition={ Excellent,Typical, Poor }]
[EnableH264={yes,no}] —This parameter controls the Blast
H264 feature on the supported platforms. The default value
is yes. The value yes enables H264 and the value no disables
H264.
This works on Blast H.264 supported platforms only.
90 Parameters for wnos INI, {username} INI, and $MAC INI files