Setup Guide

checked. The value is persistent, and the default value of the
setting is default.
From ThinOS version 8.3_109, ThinOS supports OneSign 5.2 RDSH
broker.
Set AutoAccess=RDSHD or RDSHA to automatically launch
Microsoft type broker.
Set RDSHPC to automatically launch RDP session without broker.
PasswordServer=password_server
[AccountSelfService={yes, no}]
[connect={ica, rdp}]
[encryption={Basic, 40, 56, 128,
Login-128, None}]
Specify an ica/rdp server that can be used to log on to modify
password when you sign-on with password timeout.
The PasswordServer statement can specify the connection
parameters as described in the Connect statement. If no parameter
is specied, it connects with ICA protocol.
AccountSelfService — Yes/no option to dene the password
server as an Account Self Service server.
If AccountSelfService=yes follows PasswordServer, click the icon
on the signon window to do account self-service.
If Connect parameters do not follow AccountSelfService=yes, this
password server will be the account self-service server of Citrix
and clicking the icon will use Citrix protocol to unlock or change
password for an account.
If Connect parameters follow AccountSelfService=yes, clicking the
icon launches a session to change password for an account.
PCoIP_Logging={yes, no}
[Broker_Logging_Level={0,1,2,3,4}]
[Session_Logging_Level={0,1,2,3,4}]
The option PCoIP_Logging can enable and disable the PCoIP client
logs output in Trouble Shooting. If you set the value to yes, then it
is same as selecting the Trouble Shooting Capture Export PCoIP
Log radio button to persistent and no to none.
The option Broker_Logging_level and Session_Logging_Level
accord to PCoIP broker log level and PCoIP session log level. The
default value is 0 which means critical log, 1 means log severity
error, 2 means log severity info, 3 means log severity debug, and 4
means log severity unrestrained.
PlatformCong=all
[EncryptFS=yes]
Encrypts local ash, specically cached INI les and credentials that
are stored, if using signon=yes.
NOTE:
Event log will display new statements stating that FileSystem
encryption has been enabled.
PlatformCong=”C/V/S/R/T Class”
[Firmware={Firmware lename}]
[BIOS={BIOS lename}]
[ECFirmware={EC lename}]
If a specic platform is specied by the PlatformCong parameter,
then ThinOS will attempt to load the Firmware and BIOS whose
lenames are specied by the Firmware and BIOS parameters.
If the written Firmware and BIOS are valid on le server, they will be
loaded by default; if the written Firmware and BIOS are invalid on
le server, ThinOS will load the platform default Firmware and BIOS
instead.
For example: If you re-name the Wyse 3010 thin client with ThinOS
(T10) rmware le from DOVE_boot to DOVE_boot_8.0_037., then
you must use platformcong-="T Class", then add
Firmware=DOVE_boot_8.0_037.
Parameters for wnos INI les only 31